Cosmetic Dentistry Florianópolis Santa Catarina

Country: Brazil
State: Santa Catarina
City: Florianópolis

Cosmetic Dentistry Procedures: Teeth Whitening

Whitening of the teeth is performed for patients who desire a brighter smile. Tooth whitening can be performed to reduce discoloration and staining, or simply to provide the patient with whiter, brighter teeth.

We've prepared a primer on teeth whitening to help improve your understanding of what teeth whitening can and do for a patient. Just click on the next page graphic below to get started. Or, if you want to jump to a specific topic, use the handy outline.

How white can your teeth become?

How white your teeth can become from bleaching and whitening is a common question with a very subjective answer. Some whitening procedures claim they can whiten your teeth by up to nine shades, but that is highly unlikely. Just a change of two or three shades will make a significant difference in just about anyone's smile. There is no one standard system in the dental field to measure and determine tooth color. The most often heard about, however, is the Vita shade guide. This guide divides tooth color into four basic shade ranges:
A (reddish brown)
B (reddish yellow)
C (gray)
D (reddish gray).
In the A range there are five levels of darkness. Ranges B, C and D, each have four levels.

Not all of your teeth are the same natural color. Usually your eye teeth tend to be darker than the others, your front teeth are typically the whitest, and molars tend to be a shade between the two. The goal for everyone is to achieve their individual optimum whiteness while still looking natural. During your first consultation for tooth whitening, your dentist will go over what you personally can expect for your specific smile. How white teeth will become from a given procedure will vary from person to person. The structure of your teeth and the type of procedure implemented will affect the outcome.

The following chart will give you some idea of how to compare the two most popular methods for tooth whitening. As everyone's circumstances are different, both options should be further discussed with your cosmetic dentist prior to making a decision.

Procedure Usually Lasts For: May Cause During and Shortly After Procedure: Time for Procedure: Changes in Shade: Average Cost:
Gel/Tray 4 - 12 Months Sensitive Gums/Teeth 50 Hours 4 - 5 $ 400.
Laser 12 - 18 Months Minor Discomfort 2 - 3 Hours 7 - 8 $ 1,000.
BriteSmile 12 - 18 Months Minor Discomfort 2 Hours 8+ $ 600.

How long does teeth whitening last?

Teeth whitening is not a permanent procedure. Results can last for one to or more years, depending upon your personal habits. In most cases, the whitening procedure is very effective and the patient is pleased with the results.

Types of Teeth Whitening Procedures

There are a few teeth whitening procedures available that correct discoloration of the teeth by removing the brown and yellow staining. While each work effectively, there are advantages and disadvantages to each procedure dependent upon your objectives and commitment to the processes. The type of procedures available should be discussed with your cosmetic dentist, and a they will recommend the most appropriate teeth whitening procedure for you.

BRITESMILE TEETH WHITENING (In-Office)
Using a specail light with a whitening gel, this is an in-office bleaching system. It is often followed up with an at-home bleaching kit if needed.

The translucent bleaching gel is applied to the teeth and a specail activating light source is used to activate the crystals to absorb the energy from the light and penetrate the teeth enamel to increase the lightening effect on the teeth. The length of time in the cosmetic dentist's chair depends on the degree of discoloration you have, but two hours is common.

Advantage: One visit is usually all it takes for a bright smile. The tooth whitening treatment typically costs $600.

Disadvantage: The sudden change of color is likely to be noticed by those around you immediately.

LASER BLEACHING (In-Office)
Using a laser with a whitening gel, this is an in-office bleaching system.

The translucent bleaching gel is applied to the teeth and a laser light is used to activate the crystals to absorb the energy from the light and penetrate the teeth enamel to increase the lightening effect on the teeth. The length of time in the cosmetic dentist's chair depends on the degree of discoloration you have.

Advantage: One visit is usually all it takes for a bright smile.

Disadvantage: The sudden change of color is likely to be noticed by those around you immediately. This is the more expensive of the procedures available, but also the quickest.

LASER BLEACHING (In-Office)
Using a laser with a whitening gel, this is an in-office bleaching system.

The translucent bleaching gel is applied to the teeth and a laser light is used to activate the crystals to absorb the energy from the light and penetrate the teeth enamel to increase the lightening effect on the teeth. The length of time in the cosmetic dentist's chair depends on the degree of discoloration you have.

Advantage: One visit is usually all it takes for a bright smile.

Disadvantage: The sudden change of color is likely to be noticed by those around you immediately. This is the more expensive of the procedures available, but also the quickest.

CUSTOM FIT TRAY BLEACHING (In-Home)
A custom fitted tray is worn over your teeth. A small amount of the bleaching gel is placed in the tray and worn for a brief amount of time each day. This is the most common technique because it's easy to use and costs less. Impressions are taken of your mouth and a thin custom made plastic tray is made which you take home and wear for about one to two hours per day. While some results may be seen in a couple days, it usually takes one to two weeks to see the full whitening of your teeth. This procedure is sometimes used in conjunction with the in-office laser bleaching if you have severe discoloration (dark grey or purple) or internal teeth staining.

Advantage: A gradual whitening of your teeth over time will be less noticeable to others that you're undergoing this procedure. The cost is relatively low.

Disadvantages: This procedure will require two to four visits to the cosmetic dentists office.

How much does tray bleaching teeth cost?

The standard fee for tray bleaching teeth procedures is about $500 or more in most cases. Depending on your cosmetic dentist, this may or may not include office visits. Costs can vary depending upon the area of the country you live in and the type of whitening treatment you undergo.

Generally speaking, the price of teeth whitening increases with the number of in-office treatments required by the patient. Dental insurance does not typically cover the cost of the teeth whitening procedure.

There are a few teeth whitening procedures available that correct discoloration of the teeth by removing the brown and yellow staining. While each work effectively, there are advantages and disadvantages to each procedure dependent upon your objectives and commitment to the processes. The type of procedures available should be discussed with your cosmetic dentist, and a they will recommend the most appropriate teeth whitening procedure for you.

LASER BLEACHING (In-Office)
Using a laser with a whitening gel, this is an in-office bleaching system. The translucent bleaching gel is applied to the teeth and a laser light is used to activate the crystals to absorb the energy from the light and penetrate the teeth enamel to increase the lightening effect on the teeth. The length of time in the cosmetic dentist's chair depends on the degree of discoloration you have.

Advantage: One visit is usually all it takes for a bright smile.

Disadvantage: The sudden change of color is likely to be noticed by those around you immediately. This is the more expensive of the procedures available, but also the quickest.

How much does laser teeth whitening cost?

Costs can vary depending upon the area of the country you live in and the type of whitening treatment you undergo. Laser teeth whitening is typically over $1000. for the complete procedure.

Generally speaking, the price of teeth whitening increases with the number of in-office treatments required by the patient. Dental insurance does not typically cover the cost of the teeth whitening procedure.

Pros and Cons of Teeth Whitening

Advantages:
People typically have their teeth whitened to improve their appearance. Whiter teeth are associated with beauty and a healthier lifestyle. When people have a brighter smile, they tend to smile more often and are less self-conscious.

In addition, a whiter smile tends to minimize the appearance of facial wrinkles, giving way to a more youthful and energetic appearance.

Finally, a whiter smile gives people to whom you are speaking a place to focus on and gives you a friendlier appearance.

Disadvantages:

Although bleaching is very effective, there can be short term disadvantages, such as sore gums or teeth from the bleach. This disappears when bleach use is discontinued. Some individuals are more chemically sensitive. If you are one of them, inform your cosmetic dentist so that you can be tested for sensitivity to the solution.

Research indicates that bleaching is completely effective in more than 78% of people. In cases of serious teeth discoloration, bleaching may not be the best choice. Veneers or crowns may be the superior choice. Bleaching is usually the first solution to try due to its lower cost.

Some people experience discomfort from wearing the mouth tray. This typically goes away in short order, but if you suspect that there is a problem with the fit of your mouth tray, call your dentist's office. They can often make small adjustments that will minimize or eliminate the problem.

What causes discoloration of the teeth?

Teeth enamel discoloration can be caused by staining, aging, or chemical damage to teeth. Some of the more common causes of teeth discoloration are medications, coffee, tea or cigarettes. People who drink significant amounts of cola soft drinks can experience similar staining.

Aside from staining, there are other factors that can affect the color of an individual's teeth. Genetics can play a role. Some people have naturally brighter enamel than others. Disease can also be a factor and certain medications can cause a discoloration of the teeth. If you suspect that there is an underlying medical cause for your teeth discoloration, be sure to inform your cosmetic dentist.

COSMETIC GUM SURGERY

What is cosmetic gum surgery?

Your gum tissue is like a frame that provides form and shape to the top of your tooth. A less than attractive smile results when the integrity of the gum is compromised or the actual gum between your teeth becomes weak. Usually due to poor hygiene (gum disease), you actually begin to lose gum tissue. Cosmetic dentistry provides many cosmetic solutions such as composite resin bonding, crowns, and veneers to create a great smile. These solutions are usually part of an overall strategy which may involve cosmetic gum surgery. Used to correct a 'gummy smile' (a significant portion of your gum is exposed when you smile), cosmetic gum surgery is the procedure of lengthening your teeth from the neck of the tooth upwards. Your teeth then appear to be longer and much less gum is seen when you smile.

The "Long in the Tooth" Smile - Cosmetic gum surgery, or periodontal plastic surgery, can correct almost any deformity or gingival problems preventing you from a beautiful smile. As we age, our gums may shrink and recede which makes our teeth look longer. While this is often age-related, it can also occur due to a bad bite. A cosmetic dentist or a periodontist can correct this to such an extent, that you'll have a very youthful appearing smile.

The "Gummy Smile" - This is a problem where your teeth appear to be too short. Gum sculpting is often the solution. To solve this, a dentist uses a laser to remove the excess tissue of your "gummy" smile, which then exposes more of your tooth.

Who is a candidate for a root canal?

If your tooth is infected or there's severe damage to the pulp, a root canal will be recommended. An untreated cavity is the most common cause for this infection. The pulp inside the tooth can become inflamed from trauma or extensive restorative work. It can even be affected from a series of fillings being applied in a short period of time. This inflammation usually leads to infection. Pain in the tooth is the most common and obvious symptom.

Pros and Cons of Dental Root Canals

Advantage: Pain is always associated with root canals, but should actually be little to no pain during the procedure. The procedure is not for cosmetics, but rather your health. The infect will only get worse with time if left untreated. The root canal procedure is successful over 92 percent of the time. The biggest advantage is that the tooth will not need to be extracted in the future.

Disadvantage: Not often, but sometimes infected tissue is pushed through the ends of the root, which will infect the gum. This is easily treated, but is also painful until the infection is cleared up. Canals are irregularly shaped, and if the canal is not accurately measured or branches of the canal were not discovered, it cannot be completely cleaned or filled requiring the procedure to be done again when this area becomes infected.

Who is a candidate for Dental Veneers?

Veneers, porcelain or plastic, are placed over the front teeth to change color shape of the teeth. Veneers are ideal for teeth that are too small, too big, or have uneven surfaces. It is very common for people to have imperfect teeth, either oddly shaped teeth, chipped teeth, crooked teeth,teeth with small holes in them, or an inappropriate sized tooth or teeth that have an odd appearance. Veneers solve such irregularities and create a durable and pleasing smile.

Overview of Tooth Veneers

Often an alternative to crowns, veneers are very thin pieces of specially-shaped porcelain or plastic that are glued over the front of your teeth with little or no anesthesia needed. They are the cure for teeth that are severely discolored, chipped, have small holes or pits, misshapen or crooked, or for the correction of unwanted or uneven spaces. Unlike crowns, veneers won't require the dentist to remove much of the tooth itself in most cases. It is important to ask your cosmetic dentist how much tooth will be removed. In some cases more tooth will need to be removed, which may increase the risk of trauma to the tooth. Veneers are created from an impression taken in your cosmetic dentist's office. Your custom veneer is then glued directly onto your tooth. Typically costing less than crowns, veneers won't stain, making veneers a very popular solution for many people seeking that perfect smile. Strong and very durable, veneers last from ten to fifteen years, and come in colors that will brighten dark teeth without the worry of them changing color.

How are Tooth Veneers Attached to your Tooth?

In your first appointment, it is important to initially discuss with your cosmetic dentist that you will want to "try in" your veneers with temporary cement that is the same color cement as will be used for the permanent attachment. During this "try-in" phase, be sure to look at your veneers in natural light in addition to the office light. Teeth are prepared for veneers by lightly buffing to allow for the small added thickness of the veneer. Veneers are thin like contact lenses, and will usually only need tooth reduction of 0.5mm to 1.0mm. If a drastic change is being made for the result you want, reduction may be 1.0mm to 2.0mm. A mold is taken of the teeth, from which the veneers are modeled after. Temporary veneers will be placed and worn until your permanent veneers are ready. While wearing the temporary veneers, advise your cosmetic dentist of any adjustments or changes you would like made, such as in shape or size. These changes will be translated into your permanent veneers, so good communication between you and your dentist is important in achieving your new smile.

Your dentist places the veneers with water or glycerin on the teeth to verify their perfect fit and the shade or color. The color cannot be changed after the veneers are adhered to your teeth. The tooth is then cleansed with chemicals to achieve a durable bond. Once the glue is between the veneer and your tooth, a light beam is used to harden the glue/cement.

Pros and Cons of Tooth Veneers

Advantages:
Porcelain veneers are common in creating new smiles and smile makeovers. With porcelain veneers, you can have the smile of your dreams in a very short period of time. Typically veneers are difficult to stain, making veneers a very popular solution for many people seeking that perfect smile. Strong and very durable, veneers last from ten to fifteen years, and come in colors that will brighten dark teeth without the worry of them changing color. Veneers are typically done in only two one and a half hour long appointments, and can actually strengthen your tooth.

There is no additional maintenance, other than a follow-up visit to your cosmetic dentist and proper brushing and flossing on a daily basis.

Finally, a whiter smile gives people to whom you are speaking a place to focus on and gives you a friendlier appearance.

Disadvantages:
It takes roughly a week or two of a period of adjustment to get used to your teeth that have been changed in color, size, spacing and shape. While very little tooth is removed in most cases, there are situations where more tooth must be removed which increases the risk of trauma to the tooth. The amount of tooth to be removed for the veneers should be discussed with your cosmetic dentist beforehand.

It is common to have minor sensitivity after your teeth have been prepared for your veneers while wearing the temporary veneers. Some people can experience a difference in speech, usually pronouncing "s" and "f" sounds. This is corrected through minor adjustments your cosmetic dentist can make to your veneers. Veneers are very reasonable facsimiles of natural teeth, but not perfect replacements for natural teeth. It's common to see slight variations in the color of veneers upon very close inspection, as with natural teeth. It can take up to a month or two before your new smile feels a part of you.

If you suffer from bruxism, clenching or grinding of your teeth, veneers can be damaged, chipped or cracked from this. If you suffer from bruxism, speak with your cosmetic dentist about wearing a mouth guard at night to protect your new smile.

Who is a candidate for tooth contouring and reshaping?

If you want your teeth to appear less crowded, lack chips and fractures, have decreased overlaps or to be without pits or grooves in the enamel, this procedure should be discussed with your cosmetic dentist. With a little dental contouring, you can make a huge difference in the way you feel about your smile. Good cosmetic dentistry can give you a smile that is the envy of others. Tooth contouring by a cosmetic dentist does require that you have normal, healthy teeth.

Tooth reshaping, or tooth sculpting, is a safe and conservative way to improve your smile. Teeth may become weaker if large amounts of enamel are removed, tooth reshaping should be limited to minor changes or combined with veneers or bonding for the best smile.

Types of Tooth Contouring and Reshaping Procedures
There are actually several ways to change the appearance of your teeth. Many times these various procedures are combined in different ways to deliver that smile of your dreams.

Tooth Contouring and Reshaping

The reshaping of a your teeth is a procedure that involves the removal of a very small amount of tooth structure to help achieve a more desirable smile. Chipped or fractured areas are smoothed out and specific angles or edges can be rounded or squared. Contouring creates better alignment and can create a more feminine or masculine smile. It is sometimes done to prevent chipped areas from getting worse. Tooth reshaping is a conservative way to improve the teeth. Since teeth can become weaker if large amounts of enamel are removed, this procedure is limited to minor changes or combined with veneers or bonding for a terrific smile.

Dental Veneers

Veneers are sometimes used in conjunction with contouring. Dental veneers are very thin pieces of specially-shaped porcelain or plastic that are glued over the front of your teeth with little or no anesthesia needed. They are the cure for teeth that are severely discolored, chipped, have small holes or pits, misshapen or crooked, or for the correction of unwanted or uneven spaces. Unlike crowns, veneers won't require the dentist to remove much of the tooth itself. Veneers are created from an impression taken in your cosmetic dentist's office. Your custom veneer is then glued directly onto your tooth.

Tooth Bonding

Basically, bonding will cover any natural flaws applying a thin coating of a plastic material on the front surface of your teeth. After this, your cosmetic dentist will apply a bonding material sculpt, color and shape it to provide a pleasing result. A high-intensity light then hardens the plastic, and the surface is finely polished. This procedure often accompanies contouring and teeth reshaping procedures.

How much does tooth contouring and reshaping cost?

Your dental insurance is likely to cover tooth contouring and reshaping only if it is needed as a result of an accident, but this is a relatively inexpensive procedure. The cost depends on how much the dental reshaping is needed, but average costs are approximately $50 to $350 per tooth.

Pros and Cons of a tooth contouring and reshaping

Advantages:
Your dentist can remove only a small amount of tooth enamel, contouring your problem tooth into a more pleasing shape for an improved smile. The tooth contouring procedure is quick, simple, painless, and inexpensive.

Disadvantages:
There are limits. You may be at risk for tooth breakage and decay if too much enamel is removed your teeth. If your teeth were uneven because you grind them, they'll become uneven again until the grinding issue is resolved. Your dental insurance is likely to cover tooth contouring and reshaping only if it is needed as a result of an accident.

Complete Dentures

These replace all of your teeth, upper or lower. Their comfort depends on muscle, bones, tongue, and saliva. Patients begin wearing conventional dentures after healing the teeth that were pulled.

Immediate Dentures

Immediate Dentures are placed all at once, and may require additional adjustments after the healing process. It can take months for your bone and tissue to stabilize after tooth extractions.

Upper Dentures

Upper Dentures, tend to be a bit easier to adjust to. These are made of the same materials as a Complete Denture, but are designed to provide you with upper teeth only.

Over Dentures

Over Dentures are a type of conventional denture similar to Complete Dentures. The difference is that not all teeth are extracted and they use one or more natural teeth for their support. This type provides greater stabilization during chewing. Over Dentures cost more and typically require more preparation dental appointments until the procedure is fully complete.

Partial Dentures

Designed to correct the gaps in your smile when only some of your teeth are missing. Metal attachments anchor the dentures to your natural teeth. Partial Dentures maintain tooth alignment by preventing your remaining teeth from shifting. Partial Dentures can also help prevent your loss of more teeth due to decay or gum disease.

Pros and Cons of a Dentures

Advantages:
Dentures definitely provide a great smile with a very natural appearance. They're made of very durable materials and last very long when properly taken care of. Typically dentures last from five to ten years. They also correct several problems, from speech to chewing, for many patients.

Disadvantages:
There's no doubt that dentures take a little getting used to. There is maintenance involved, and initial speech issues to overcome (these are temporary and last only a couple of days). Mouth irritation or sores may occur, but are usually caused by poor dental hygiene, and not removing your dentures when needed. It is common that your mouth change over the life of your dentures, so even though they last long, they may need to be replaced to achieve a better fit before they are worn out. With a denture a person typically chews at only 15-23% efficiency compared to a person chewing with their natural teeth. In the case of a full upper denture, the upper palate is covered which can reduce taste of foods you're chewing.

TOOTH CAPS

What are Tooth Caps?

Grinding of your teeth, an improper bite, age, fillings and tooth decay can all be contributing factors in the wearing down, cracking or breakage of your teeth. Dental caps cover the entire visible surface of your affected tooth and add strength, durability and stability.

How are Dental Caps Attached to your Tooth?

A cosmetic dentist will make an impression (mold) of your tooth and a dental laboratory will create the needed custom cap. You will typically leave the office with a temporary cap to wear while the permanent cap is being made - this takes about fourteen days. The permanent cap is then cemented onto your tooth. Typically, only two visits are required for this part of the procedure. Often, a preliminary restoration of your tooth may be needed before the permanent cap is actually placed. To stabilize your tooth, a filling must first be put in place prior to placing a cap to counter any loss of your original tooth structure.

It is important to discuss with your cosmetic dentist that the cement color used for your permanent cap will be the same as used for the temporary cap (try in paste). The color of the cement does affect the overall color of a porcelain cap, so this needs to be discussed well before your temporary cap is placed.

In some cases your cosmetic dentist may choose to use a Flipper instead of a temporary cap. A Flipper is a false tooth to temporarily take the place of a missing tooth before the permanent crown is placed. A Flipper can be attached via either a wire or a plastic piece that fits in the roof of your mouth. Flippers are meant to be a temporary solution while awaiting the permanent cap.

Types of Tooth Caps

There are generally three types of caps - those made of gold, ceramic caps and ceramic-veneered gold caps. Gold and metal-ceramic caps are extremely durable and are normally used in molars, where the forces from chewing and grinding are most prevalent. Ceramic caps are used primarily for front teeth, since they can best resemble the natural tooth color and are more pleasing to the eye.

Types of Porcelain used with Dental Caps
There are basically two types of porcelain you're likely to hear and read about most when researching dental caps and crowns- the felspathic and pressed ceramic porcelains. The felspathic type is the original method that has been around for 20 years. A Ceramist in a dental lab bakes porcelain onto tin foil and then heats it in an oven. The Ceramist is able to create tints and opaques inside the porcelain of the dental cap or crown to give the natural look we seek.

Pressed ceramic is created from a single ingot. The single ingot is milled in one piece to create the desired shape of the cap or crown. The stains and opaques are applied only to the surface of the porcelain to give a natural look for your new smile.

Resin and Porcelain Caps
The new reinforced resin or bonded all-porcelain type of cap has the nicest appearance. This cap can be made from pure ceramic or a new reinforced composite resin. It is almost indistinguishable from natural teeth. The new bonding technology involved provides an exceptional bond your tooth. It is metal-free, and thus satisfies the needs of patients with metal sensitivities. When correcting your back teeth with bonding, the cosmetic dentist will perform a tooth colored onlay. This type of procedure is used to correct only the parts of your tooth that are in need. This procedure is metal-free.

Caps Made of Gold
Gold caps are used when appearance is not a priority to you. The gold is extremely workable, making gold caps a more precise fit than any other type. While there exists a slight possibility of chipping with porcelain caps, gold caps provide no such possibility.

Porcelain and Metal Caps
For a very natural appearance, porcelain fused to metal caps are the answer for you. However, they have a metal substructure and require an opaque below the porcelain, which can make the translucency of natural teeth difficult to match. Sometimes a darker line will be visible at the edge of the cap, near to your gum when your gum recedes with age.

Pros and Cons of Dental Caps Types

Dental caps in general add a good deal of strength to a weakened or worn tooth, and last ten to fifteen years. Depending on your habits and the condition of your gums, there may be some drawbacks for you. Your cosmetic dentist will advise which is best for you given several factors, such as how important appearance is to you. The following are the advantages and disadvantages of the most common types of caps.

Gold Caps

Advantage: The preparation of your tooth for a gold cap is the simplest and least complicated preparation. There is minimal tooth structure removal with as much as possible of the healthy tooth structure remaining untouched. As porcelain is hard by comparison, it may cause wear on opposing teeth over the years where gold is not as likely to do this. Gold is also easier to place to the area where the tooth and cap meet for a better fit. Gold is also a healthier environment for the gum tissue.

Disadvantage: The biggest disadvantage to gold caps is cosmetic, unless it is being used in the back of your mouth.

Porcelain Caps

Advantage: Porcelain caps or the new reinforced resin types are considered to be the most aesthetically pleasing, as it is so easily matched in color to your surrounding teeth.

Disadvantage: The thickness of the porcelain required for pleasing aesthetics also requires that more tooth structure is removed. Also, it is more difficult for your cosmetic dentist to get an ideal fit where your gum meets the cap. Gingival inflammation is typically more common with porcelain caps than gold caps.

Porcelain Fused-to-Metal Caps

Advantage: Porcelain fused-to-metal caps have a very natural and pleasing appearance.

Disadvantage: They have a metal substructure and require an opaque below the porcelain, which can make the translucency of natural teeth difficult to replicate. Occasionally a darker line will be visible at the edge of the cap, by your gum as your gum recedes with age.

What are dental implants?

Dental implants are fixtures of titanium which are surgically screwed into your jaw bone. The implant is an anchor for a naturally-appearing false tooth or a set of false teeth. The success rate of dental implants depends on where the implants are placed and their purpose. They are typically best placed in the front portion of your lower jaw. Implants are great for replacing missing teeth. It is important that you have enough bone in the area of the missing teeth for the implants to be attached to. Implants are not only used to replace one tooth, but rather people missing most, if not all, of their teeth benefit greatly as well. Implants are increasingly being used to replace certain types of bridges and removable partial dentures.

Overview of Dental Implants

Implants are surgically placed in your jaw bone while under anesthesia. It is a very time consuming procedure when having many implants placed. As this procedure is surgical, it is very important to research and find a well credited cosmetic dentist that you are comfortable with. For some people there are varying degrees discomfort or pain, which subsides in a couple of days. As with similar types of surgery, bruising and minor swelling might also develop shortly after the procedure.

How are Dental Implants Attached in Your Mouth?

The implant procedure is a surgical placement of the implant or implants in your jaw bone which requires a three to six month healing period before the implant restoration to replace the missing tooth or teeth. During this healing time, the bone grows in and around the titanium implant creating a very strong support. Dental implants can be rejected. Usually they are replaced with another implant of a slightly larger size. The rejection or "failure" rate is minimal, only 1 to 2% of all implant procedures. You must go without wearing your dentures for one day to two weeks after an implant placement. After the implant has "taken" and you have sufficiently healed, a very natural crown is placed on the implant.

When missing one tooth, your cosmetic dentist may use a Flipper to fill the space. A Flipper is a false tooth to temporarily take the place of a missing tooth before the permanent crown is placed on the implant. A Flipper can be attached via either a wire or a plastic piece that fits in the roof of your mouth. Flippers are meant to be a temporary solution while awaiting the permanent crown to be placed on your implant(s).

If you're missing one tooth or all of your teeth, implants may well be for you. So long as you have enough bone in the area of the missing tooth to facilitate the anchorage of the implants, this procedure can yield terrific results. If you don't have enough bone for this purpose, a bone graft may be necessary. A procedure of building up the bone is known as Bone Grafting. Bone grafting is common with dental implants. The bone that is used is one of three types. The preferred bone to use is taken from other areas of your mouth or collected in a suction device as the drilling of the sites for dental implants occurs. Sometimes bone is taken from areas such as a hip (this requires an orthopedic surgeon and an operating room). The third source for needed bone is a synthetic type. This is the least preferred type of bone to be used for this procedure.

How much do dental implants cost?

Dental implants can be a costly procedure. An entire team of professionals are needed to deliver a long-lasting smile. Implant procedures demand a great deal of the doctor's and staff's time and effort. The prosthodontist intensely studies your health profile, and then develops a plan to meet your unique needs. Additionally, surgical staff and the laboratory perform several services to produce the desired result. The materials used to construct implant prosthodontics are also very expensive. Bone grafting, if needed, is additionally costly.

While a basic implant is typically $1,250. to $3,000., depending on your circumstances additional costs for things such as in the case of a posterior mandible, bone regeneration, sinus elevation, and wide diameter or narrow diameter implants quickly escalate to as much as $15,000 to $30,000. for the complete procedure for the upper or lower jaw.

Pros and Cons of Dental Implants

Advantages:
As our life span increases, a permanent dental replacement like implants is increasingly important as we get older. While dentures and removable bridges are usually loose and unstable, implants provide you with dental replacements that are both natural looking and very functional. Implants look much better, and feel better, than traditional removable bridges, and offer the same force for biting as bridges that are fixed in place. Implants will last your lifetime.

Disadvantages:
Implants are a major investment and not without risk. The extensive use of implants can cost tens of thousands of dollars to achieve a great result. It is also a very time consuming procedure when having many implants placed. As this procedure is surgery, it is very important to research and find a well credited cosmetic dentist that you are comfortable with. For some people there are varying degrees discomfort or pain, which subsides in a couple of days. As with similar types of surgery, bruising and minor swelling might also develop shortly after the procedure. The crown (false tooth placed on top) will need to be replaced in ten to fifteen years.

How to choose the color of dental implants?

When considering dental implants a common question is how white the dental implants should be. Usually, the answer is to whiten your natural teeth to either the level of whiteness you want or to the brightest they can be. Your cosmetic dentist will then have the dental implants made to that color. Teeth are of course not monochromatic, so typically more than one color is used to create a very natural look. This color variation is critical in avoiding fake or artificial looking teeth. It is the internal contrast of colors that help create vitality. The internal play of light on the porcelain in the restoration helps to create this vitality. Surface texture is also very important, and helps to break up light reflections and make the dental implants look more natural.

There is no one standard system in the dental field to measure and determine tooth color. The most often heard about, however, is the Vita shade guide. This guide divides tooth color into four basic shade ranges:
A (reddish brown)
B (reddish yellow)
C (gray)
D (reddish gray).
In the A range there are five levels of darkness. Ranges B, C and D, each have four levels.

Not all of your teeth are the same natural color. Usually your eye teeth tend to be darker than the others, your front teeth are typically the whitest, and molars tend to be a shade between the two. The goal for everyone is to achieve their individual optimum whiteness while still looking natural.

Most dentists will show you a shade chart (like the above mentioned Vita Shade Guide) for you to pick from. Keep in mind, with a good cosmetic dentist this is merely a starting point. Other considerations when determining the color of dental implants for each patient are your complexion, hair color, the color of your natural teeth and even your eye color.

How long does tooth bonding last?

While the traditional silver fillings last about seven years, these composites should last about seven to eleven years.

How is Tooth Bonding Accomplished?

A very mild etching solution is applied to your teeth to create very small crevices in the tooth's enamel structure. These small crevices provide a slightly rough surface permitting a durable resin to bond materials to your teeth. The resin is then placed on your tooth and high-intensity light cures the resins onto your tooth's surface - with each individual layer of resin hardening in just minutes. When the last coat has been applied to your tooth, the bonded material is then sculpted to fit your tooth and finely polished.

The resin comes in many shades so that we can match it to your natural teeth. Due to the layers involved, this procedure will take slightly longer than traditional silver fillings because multiple layers of the bonding material are applied. Typically bonding takes an hour to two hours depending on your particular case.

Types of Tooth Bonding Procedures

There are two types of bonding. What type is indicated in your situation depends upon whether you have a small area or a larger area that requires correction.

For small corrections

These are one appointment fillings which are color-matched to the tooth and are bonded to the surface for added strength. These are most appropriate for small fillings and front fillings as they may not be as durable for large fillings.

For larger corrections

Dental lab-created tooth-colored fillings require two appointments and involve making a mold of your teeth and placing a temporary filling. A dental laboratory then creates a very durable filling to custom-fit the mold made from your teeth. These fillings are typically made of porcelain. The custom-fit filling is then bonded to your tooth on your return visit. This type is even more natural looking, more durable and more stain resistant.

Pros and Cons of Tooth Bonding

Advantages of dental bonding:
Esthetics is the big advantage over silver fillings. As silver does not stick to teeth, entirely healthy tooth structure is usually removed to keep a silver filling in place. Composites permit your cosmetic dentist to remove only the decayed area of your tooth. Unlike silver fillings, composite bonding expand just like your teeth and are much less likely to cause cracks in your tooth. Composites bond directly to the tooth providing support. Composites can be used to fill in cracks, chips and gaps - and will match the color of your other teeth.

Disadvantages of the dental bonding procedures:
Bonding with composites simply costs more in material and time.

Overview of dental bridge procedure

If you a space from a missing tooth, a bridge will be custom made to fill in the space with a false tooth. The false tooth is attached by the bridge to the two other teeth around the space - bridging them together.

How is dental bridge accomplished?

Your cosmetic dentist will prepare your teeth on either side of the space for the false tooth. You will be given a mild anesthetic to numb the area, and the cosmetic dentist will remove the an area of each abutment (teeth on either side of the space) to accommodate for the thickness of the crown. When these teeth already have fillings, part of the filling may be left in place to help as a foundation for the crown.

The dentist will then make an impression, which will serve as the model from which the bridge, false tooth and crowns will be made by a dental laboratory. A temporary bridge will be placed for you to wear while your bridge is being made until your next visit. This temporary bridge will serve to protect your teeth and gums.

Your cosmetic dentist may have you use a Flipper appliance. A Flipper is a false tooth to temporarily take the place of a missing tooth before the permanent bridge is placed. A Flipper can be attached via either a wire or a plastic piece that fits in the roof of your mouth. Flippers are meant to be a temporary solution while awaiting the permanent bridge.

On your second appointment, the temporary bridge will be removed. Your new permanent bridge will be fitted and checked and adjusted for any bite discrepancies. Your new bridge will then be cemented to your teeth.

How much do dental bridges cost?

The average cost of a single fixed bridge depends on many factors, from which region you're in to how many and which type of bridges are needed. Typically dental bridge cost ranges from $500-900 per tooth. Dental insurance typically pays for about half of the cost of the bridge.

Pros and Cons of a Dental Bridge

Advantages of dental bridges:
Bridges are natural in appearance, and usually require only two visits to your dentist. If you maintain good oral hygiene, your fixed bridge should last as many as ten years or more.

Disadvantages of having a dental bridge:
It is common for your teeth to be mildly sensitive to extreme temperatures for a few weeks after the treatment. The build up of bacteria formed from food acids on your teeth and gums can become infected if proper oral hygiene is not followed.

TOOTH CROWNS

What are Tooth Crowns?

Grinding your teeth, an improper bite, age, fillings and tooth decay can all be contributing factors in the wearing down, cracking or breakage of your teeth. Dental crowns cover the entire visible surface of your affected tooth and add strength, durability and tooth stability.

How are Tooth Crowns Attached to your Tooth?

Your cosmetic dentist will make an impression of the tooth and a dental laboratory will create the crown. You will typically leave the office with a temporary crown to wear while the permanent crown is being made - this takes about two weeks. The permanent crown is then cemented onto your tooth. Typically, only two visits are required for this part of the procedure. Often, a preliminary restoration of your tooth may be needed before a crown can be placed. To stabilize your tooth, a filling must first be put in place prior to placing a crown due to the loss of original tooth structure. Tooth crowns usually last ten to fifteen years.

Be sure to discuss with your cosmetic dentist that the cement color used for your permanent crown will be the same as used for your temporary crown. A try in paste is used for this purpose. The color of the cement does affect the overall color of a porcelain crown, so this needs to be discussed long before your temporary crown is placed.

In some cases your cosmetic dentist may choose to use a Flipper instead of a temporary crown. A Flipper is a false tooth to temporarily take the place of a missing tooth before the permanent crown is placed. A Flipper can be attached via either a wire or a plastic piece that fits in the roof of your mouth. Flippers are meant to be a temporary solution while awaiting the permanent crown.

Types of Tooth Crowns
There are basically three types of crowns, those made of gold, ceramic crowns and ceramic-veneered gold crowns. Gold and metal-ceramic crowns are extremely durable and are normally used in molars, where the forces from chewing and grinding are most prevalent. Ceramic crowns are used primarily for front teeth, since they can best resemble the natural tooth color.

Resin and Porcelain Crowns
The new reinforced resin or bonded all-porcelain type of crown has the nicest appearance. This crown can be made from pure ceramic or a new reinforced composite resin, and is almost indistinguishable from natural teeth. The new bonding technology involved provides an exceptional bond your tooth. It is metal-free, and thus satisfies the needs of patients with metal sensitivities. When correcting your back teeth with bonding, the cosmetic dentist will perform a tooth colored onlay. This type of procedure is used to correct only those parts of the tooth that are in need. This is a metal-free procedure.

Crowns Made of Gold
Gold crowns are appropriate when appearance is not a priority to you. The gold metal is extremely workable making gold crowns a more precise fit than any other type. While there exists a slight possibility of chipping with porcelain crowns, gold crowns provide no such possibility.

Porcelain and Metal Crowns
For a very natural appearance, porcelain fused to metal crowns are the answer. However, they have a metal substructure and require an opaque below the porcelain. This can make the translucency of natural teeth difficult to replicate. Occasionally a darker line will be visible at the edge of the crown, near to your gum when it recedes with age.

Types of Porcelain
There are basically two types of porcelain you're likely to hear and read about most - the felspathic and pressed ceramic porcelains. The felspathic type is the original method that has been around for 20 years. A Ceramist in a dental lab bakes porcelain onto tin foil and then heats it in an oven. The Ceramist is able to create tints and opaques inside the porcelain to give the natural look we seek.

Pressed ceramic is created from a single ingot. The single ingot is milled in one piece to create the desired shape. The stains and opaques are applied only to the surface of the porcelain to give a natural look.

Pros and Cons of Dental Crowns Types

Tooth crowns in general add a good deal of strength to weakened or worn teeth. Depending on your habits and the condition of your gums, there can be some drawbacks. Your cosmetic dentist will advise which is best for you given many factors, including how important appearance is to you. The following are the advantages and disadvantages of the most common crown types.

Gold Crowns

Advantage: The preparation of a tooth for a gold crown is the simplest and least complicated preparation as there is minimal tooth structure removal with as much as possible of the healthy tooth structure remaining untouched. While porcelain is hard by comparison, it may cause wear on opposing teeth over the years where gold is not as likely to do so. Gold is also easier to fit to the area where the tooth and crown meet for a better fit. Gold is also a healthier environment for the gum tissue.

Disadvantage: The biggest disadvantage to gold crowns is the cosmetic aspect, unless it is being used in the back of your mouth.

Porcelain Crowns

Advantage: Porcelain crowns or new reinforced resin are considered to be the most aesthetically pleasing, as it is so easily matched in color to the surrounding teeth.

Disadvantage: The thickness of the porcelain required for pleasing aesthetics also requires that more tooth structure needs to be removed. It is more difficult for your cosmetic dentist to get an ideal fit where your gum meets the crown. Gingival inflammation appears to be more common with porcelain crowns than gold crowns. All-porcelain crowns require a higher skill level from your dentist and lab.

Porcelain Fused-to-Metal Crowns

Advantage: Porcelain fused-to-metal crowns have a very natural appearance.

Disadvantage: They have a metal substructure and require an opaque below the porcelain. This can make the translucency of natural teeth difficult to replicate. Occasionally a darker line will be visible at the edge of the crown, near to your gum when it recedes with age.

   

Member login | Contact Us | FAQ | Copyright perfectdentists.com All rights reserved 2004 | Terms and conditions | About us | Sat 25, Oct 2014 8:44am