Cosmetic Dentistry Couva Caroni

Country: Trinidad and Tobago
State: Caroni
City: Couva

Cosmetic Dentistry Procedures: Teeth Whitening

Whitening of the teeth is performed for patients who desire a brighter smile. Tooth whitening can be performed to reduce discoloration and staining, or simply to provide the patient with whiter, brighter teeth.

We've prepared a primer on teeth whitening to help improve your understanding of what teeth whitening can and do for a patient. Just click on the next page graphic below to get started. Or, if you want to jump to a specific topic, use the handy outline.

What causes discoloration of the teeth?

Teeth enamel discoloration can be caused by staining, aging, or chemical damage to teeth. Some of the more common causes of teeth discoloration are medications, coffee, tea or cigarettes. People who drink significant amounts of cola soft drinks can experience similar staining.

Aside from staining, there are other factors that can affect the color of an individual's teeth. Genetics can play a role. Some people have naturally brighter enamel than others. Disease can also be a factor and certain medications can cause a discoloration of the teeth. If you suspect that there is an underlying medical cause for your teeth discoloration, be sure to inform your cosmetic dentist.

Overview of Teeth Whitening

Teeth whitening is used to correct discoloration of the teeth by removing the brown and yellow staining. The term "teeth whitening" can refer to a number of techniques to improve the brightness of the patient's teeth. Among them are chemical whitening, mild acid whitening, abrasive teeth brightening and the newest technique, laser teeth whitening.

Teeth Bleaching

Teeth bleaching is chemical process used to lighten the color of the patient's teeth. The procedure can be performed entirely in the cosmetic dentist's office or it can be performed by the patient in their home, using a materials provided by the dentist. The home method is often used because it saves the patient from having to make an office visit for each treatment.

Before the patient embarks on the home teeth whitening regimen, the cosmetic dentist creates a custom mouth tray for the patient. The custom tray is a critical component of the treatment. It ensures that the correct amount of whitening solution is used and that the patient's teeth are properly exposed to the whitening solution. The custom made mouth tray provides for a better fit than a one-size-fits-all mouth tray to help increase the margin of patient safety.

The steps in the home teeth whitening regimen are fairly straightforward. The cosmetic dentist's office provides the patient with the materials and instructions and also answers questions the patient may have about the routine. Your dentist's office can also provide you with off-site supervision should you have any questions once you've begun.

A home whitening session can last for two to three hours, during which time you will have the tray and solution in your mouth. Depending upon your needs and desired results, your dentist may instruct you to keep the tray in your mouth overnight. Typically, you will follow your home teeth whitening regimen for two to three weeks, after which time you will return to your cosmetic dentist for a follow up visit.

How long does teeth whitening last?

Teeth whitening is not a permanent procedure. Results can last for one to or more years, depending upon your personal habits. In most cases, the whitening procedure is very effective and the patient is pleased with the results.

How much does tray bleaching teeth cost?

The standard fee for tray bleaching teeth procedures is about $500 or more in most cases. Depending on your cosmetic dentist, this may or may not include office visits. Costs can vary depending upon the area of the country you live in and the type of whitening treatment you undergo.

Generally speaking, the price of teeth whitening increases with the number of in-office treatments required by the patient. Dental insurance does not typically cover the cost of the teeth whitening procedure.

How much does laser teeth whitening cost?

Costs can vary depending upon the area of the country you live in and the type of whitening treatment you undergo. Laser teeth whitening is typically over $1000. for the complete procedure.

Generally speaking, the price of teeth whitening increases with the number of in-office treatments required by the patient. Dental insurance does not typically cover the cost of the teeth whitening procedure.

Pros and Cons of Teeth Whitening

Advantages:
People typically have their teeth whitened to improve their appearance. Whiter teeth are associated with beauty and a healthier lifestyle. When people have a brighter smile, they tend to smile more often and are less self-conscious.

In addition, a whiter smile tends to minimize the appearance of facial wrinkles, giving way to a more youthful and energetic appearance.

Finally, a whiter smile gives people to whom you are speaking a place to focus on and gives you a friendlier appearance.

Disadvantages:

Although bleaching is very effective, there can be short term disadvantages, such as sore gums or teeth from the bleach. This disappears when bleach use is discontinued. Some individuals are more chemically sensitive. If you are one of them, inform your cosmetic dentist so that you can be tested for sensitivity to the solution.

Research indicates that bleaching is completely effective in more than 78% of people. In cases of serious teeth discoloration, bleaching may not be the best choice. Veneers or crowns may be the superior choice. Bleaching is usually the first solution to try due to its lower cost.

Some people experience discomfort from wearing the mouth tray. This typically goes away in short order, but if you suspect that there is a problem with the fit of your mouth tray, call your dentist's office. They can often make small adjustments that will minimize or eliminate the problem.

TOOTH WHITENING

Sometimes a single tooth becomes discolored causing it to look out of place with the rest of your smile. In these cases you may want to consider having the tooth whitened to match the rest of your teeth. If you'd like to learn more about what causes the discoloration and what can be done about it, please follow the links below.


How much can a tooth be whitened?

How white an individual tooth can become from bleaching and whitening is a common question. Some whitening procedures claim they can whiten your teeth by up to nine shades, but that is highly unlikely. A change of two or three shades will make a significant difference in just about anyone's smile. There is no one standard system in the dental field to measure and determine tooth color. However, the Vita shade guide is the most used. This guide divides individual tooth color into four basic shade ranges:
A (reddish brown)
B (reddish yellow)
C (gray)
D (reddish gray).
In the A range there are five levels of darkness. Ranges B, C and D, each have four levels.

Not all of your teeth are the same natural color. As strange as it may sound, usually your eye teeth are darker than the others, and your front teeth are almost always the whitest, and molars tend to be a shade between those two. When your cosmetic dentist is whitening one particular tooth, they will take this into account. The goal for everyone is to achieve an overall whiteness while still looking natural. During your first consultation for tooth whitening, your dentist will go over what you personally can expect for your specific smile. How a white tooth will become will vary from person to person. The structure of your tooth and the type of procedure implemented will affect the outcome.

The following chart will give you some idea of what to expect. As everyone's circumstances are different, options should be further discussed with your cosmetic dentist prior to making a decision. Most people are not seeking a gradual whitening of an individual tooth. The laser whitening procedure affords the cosmetic dentist the needed control and the patient the instant results sought.

Procedure: Usually Lasts For: May Cause During and Shortly After Procedure: Time for Procedure: Changes in Shade: Average Cost:
Laser 12 - 18 Months Minor Discomfort 2 - 3 Hours 7 - 8 $ 300.

COSMETIC GUM SURGERY

What is cosmetic gum surgery?

Your gum tissue is like a frame that provides form and shape to the top of your tooth. A less than attractive smile results when the integrity of the gum is compromised or the actual gum between your teeth becomes weak. Usually due to poor hygiene (gum disease), you actually begin to lose gum tissue. Cosmetic dentistry provides many cosmetic solutions such as composite resin bonding, crowns, and veneers to create a great smile. These solutions are usually part of an overall strategy which may involve cosmetic gum surgery. Used to correct a 'gummy smile' (a significant portion of your gum is exposed when you smile), cosmetic gum surgery is the procedure of lengthening your teeth from the neck of the tooth upwards. Your teeth then appear to be longer and much less gum is seen when you smile.

The "Long in the Tooth" Smile - Cosmetic gum surgery, or periodontal plastic surgery, can correct almost any deformity or gingival problems preventing you from a beautiful smile. As we age, our gums may shrink and recede which makes our teeth look longer. While this is often age-related, it can also occur due to a bad bite. A cosmetic dentist or a periodontist can correct this to such an extent, that you'll have a very youthful appearing smile.

The "Gummy Smile" - This is a problem where your teeth appear to be too short. Gum sculpting is often the solution. To solve this, a dentist uses a laser to remove the excess tissue of your "gummy" smile, which then exposes more of your tooth.

Pros and Cons of Cosmetic Gum Surgery

Advantages:
Healing is usually quick and your more youthful and beautiful smile is obvious early on. It has been reported that cosmetic gum surgery additionally improves the health of your gums. The procedure to correct receding gums may even reduce your tooth sensitivity to cold or hot foods or beverages while protecting your roots from decay and lessening further gum shrinkage.

Disadvantages:
Cosmetic gum surgery is of course, surgery. Surgery is often performed in segments under a local anesthetic - unless your entire mouth is undergoing this procedure at once, then a general anesthesia is typically used.

ROOT CANALS

Dental Root Canals for Your Teeth

Many of us have heard the comparisons of painful things to the root canal procedure. It's not that bad. There are tiny canals within your tooth that may become infected. This leads to the pulp inside your tooth also becoming diseased. Either your dentist or an endodontist to remove any infection performs the root canal procedure. The canals are then filled and the tooth receives either a filling or a crown. Crowns are more common in most cases as they add strength to the tooth itself. The procedure itself takes one to two visits.

What are Root Canals?

There are tiny canals within your tooth that may become infected. This leads to the pulp inside your tooth also becoming infected as well. Either your dentist or an endodontist to remove any infection performs the root canal procedure. The canals are cleaned and then filled and the tooth receives either a filling or a crown.

Who is a candidate for a root canal?

If your tooth is infected or there's severe damage to the pulp, a root canal will be recommended. An untreated cavity is the most common cause for this infection. The pulp inside the tooth can become inflamed from trauma or extensive restorative work. It can even be affected from a series of fillings being applied in a short period of time. This inflammation usually leads to infection. Pain in the tooth is the most common and obvious symptom.

How are Dental Root Canals Performed?

Depending on the number of teeth and severity affected, root canals usually require one to two visits not including any follow-up visits. Your dentist or endodontist will numb the area around the affected tooth, or may offer you the option of mild sedation. The tooth is then drilled to the pulp area either through the top or the back of the tooth. The actual root canals are measured after some of the pulp has been removed. This is done so that the dentist can clean the entire canal, and so that enough of the filling material will be used to completely fill the canal. The actual measuring is done with either x-rays or electronic imaging devices.

All of the diseased pulp in the tooth is removed, and the canal is cleaned out thoroughly with an antiseptic solution. This solution will clean all of the canals within the tooth. The canals are then filled with gutta percha, a flexible plastic material. A temporary filling is then put on top of that. A crown or permanent filling will be done after there has been no sign of infection. Crowns are most common since the root canal procedure weakens the tooth. The crown is usually placed as soon as possible, within a month or less.

Expect two to three days of soreness after the procedure, or longer if the infection in the root canal was severe.

How much do dental root canals cost?

Expect the cost of a root canal treatment to be about $400. to $600. per front tooth and about $500. to $800. for a molar. The difference is because front teeth usually have only one root canal and molars usually have three or more. The costs for a crown or permanent filling are additional. Costs for a second root canal, hopefully not needed, on the same tooth are slightly higher.

Who is a candidate for Dental Veneers?

Veneers, porcelain or plastic, are placed over the front teeth to change color shape of the teeth. Veneers are ideal for teeth that are too small, too big, or have uneven surfaces. It is very common for people to have imperfect teeth, either oddly shaped teeth, chipped teeth, crooked teeth,teeth with small holes in them, or an inappropriate sized tooth or teeth that have an odd appearance. Veneers solve such irregularities and create a durable and pleasing smile.

Overview of Tooth Veneers

Often an alternative to crowns, veneers are very thin pieces of specially-shaped porcelain or plastic that are glued over the front of your teeth with little or no anesthesia needed. They are the cure for teeth that are severely discolored, chipped, have small holes or pits, misshapen or crooked, or for the correction of unwanted or uneven spaces. Unlike crowns, veneers won't require the dentist to remove much of the tooth itself in most cases. It is important to ask your cosmetic dentist how much tooth will be removed. In some cases more tooth will need to be removed, which may increase the risk of trauma to the tooth. Veneers are created from an impression taken in your cosmetic dentist's office. Your custom veneer is then glued directly onto your tooth. Typically costing less than crowns, veneers won't stain, making veneers a very popular solution for many people seeking that perfect smile. Strong and very durable, veneers last from ten to fifteen years, and come in colors that will brighten dark teeth without the worry of them changing color.

How are Tooth Veneers Attached to your Tooth?

In your first appointment, it is important to initially discuss with your cosmetic dentist that you will want to "try in" your veneers with temporary cement that is the same color cement as will be used for the permanent attachment. During this "try-in" phase, be sure to look at your veneers in natural light in addition to the office light. Teeth are prepared for veneers by lightly buffing to allow for the small added thickness of the veneer. Veneers are thin like contact lenses, and will usually only need tooth reduction of 0.5mm to 1.0mm. If a drastic change is being made for the result you want, reduction may be 1.0mm to 2.0mm. A mold is taken of the teeth, from which the veneers are modeled after. Temporary veneers will be placed and worn until your permanent veneers are ready. While wearing the temporary veneers, advise your cosmetic dentist of any adjustments or changes you would like made, such as in shape or size. These changes will be translated into your permanent veneers, so good communication between you and your dentist is important in achieving your new smile.

Your dentist places the veneers with water or glycerin on the teeth to verify their perfect fit and the shade or color. The color cannot be changed after the veneers are adhered to your teeth. The tooth is then cleansed with chemicals to achieve a durable bond. Once the glue is between the veneer and your tooth, a light beam is used to harden the glue/cement.

How much do tooth veneers cost?

Porcelain Veneers typically cost between $900 - $2,500. per tooth and require two or more visits one to two weeks apart. Veneers made of porcelain provide a greater longevity than plastic, typically ten years to fifteen years or more.

Composite Veneers cost significantly less, around $250 per tooth or more, but only last from five to seven years typically.

Generally speaking, the price of tooth veneers and whitening increases with the number of in-office treatments required by the patient. Dental insurance does not typically cover the cost of the tooth veneers procedure.

TOOTH CONTOURING AND RESHAPING

What is tooth contouring and reshaping?

Tooth reshaping, or contouring, is one of few instant treatments now available in cosmetic dentistry. Dental reshaping and contouring is a procedure to correct crooked teeth, chipped teeth, cracked teeth or even overlapping teeth in just one session.

The dental contouring procedure can even be a substitute for braces under certain circumstances. It is also a procedure of subtle changes. A few millimeters of reduction and a few millimeters of tooth-colored laminate can create a beautiful smile when performed by a cosmetic dentist, with no discomfort to you. Tooth reshaping, or dental contouring, is commonly used to alter the length, shape or position of your teeth.

Who is a candidate for tooth contouring and reshaping?

If you want your teeth to appear less crowded, lack chips and fractures, have decreased overlaps or to be without pits or grooves in the enamel, this procedure should be discussed with your cosmetic dentist. With a little dental contouring, you can make a huge difference in the way you feel about your smile. Good cosmetic dentistry can give you a smile that is the envy of others. Tooth contouring by a cosmetic dentist does require that you have normal, healthy teeth.

Tooth reshaping, or tooth sculpting, is a safe and conservative way to improve your smile. Teeth may become weaker if large amounts of enamel are removed, tooth reshaping should be limited to minor changes or combined with veneers or bonding for the best smile.

Types of Tooth Contouring and Reshaping Procedures
There are actually several ways to change the appearance of your teeth. Many times these various procedures are combined in different ways to deliver that smile of your dreams.

Tooth Contouring and Reshaping

The reshaping of a your teeth is a procedure that involves the removal of a very small amount of tooth structure to help achieve a more desirable smile. Chipped or fractured areas are smoothed out and specific angles or edges can be rounded or squared. Contouring creates better alignment and can create a more feminine or masculine smile. It is sometimes done to prevent chipped areas from getting worse. Tooth reshaping is a conservative way to improve the teeth. Since teeth can become weaker if large amounts of enamel are removed, this procedure is limited to minor changes or combined with veneers or bonding for a terrific smile.

Dental Veneers

Veneers are sometimes used in conjunction with contouring. Dental veneers are very thin pieces of specially-shaped porcelain or plastic that are glued over the front of your teeth with little or no anesthesia needed. They are the cure for teeth that are severely discolored, chipped, have small holes or pits, misshapen or crooked, or for the correction of unwanted or uneven spaces. Unlike crowns, veneers won't require the dentist to remove much of the tooth itself. Veneers are created from an impression taken in your cosmetic dentist's office. Your custom veneer is then glued directly onto your tooth.

Tooth Bonding

Basically, bonding will cover any natural flaws applying a thin coating of a plastic material on the front surface of your teeth. After this, your cosmetic dentist will apply a bonding material sculpt, color and shape it to provide a pleasing result. A high-intensity light then hardens the plastic, and the surface is finely polished. This procedure often accompanies contouring and teeth reshaping procedures.

DENTURES

What are dentures?

Dentures are removable replacements for missing teeth typically made out of an acrylic resin which at times incorporate porcelain or metal for additional structural support. There are two main types of dentures. Both Complete Dentures and Partial Dentures are finely crafted, custom-fitted. If you properly maintain your dentures they will appear natural and provide a perfect smile. Additionally, dentures help strengthen muscles controlling your expressions that require the support of your teeth, rid you of pronunciation problems caused by missing teeth and aid with chewing.

Overview of dentures

Dentures are removable replacements for missing teeth typically made out of an acrylic resin which may at times incorporate porcelain or metal for additional structural support. There are two main types of dentures, complete and partial. Both Complete dentures and partial dentures are finely crafted and custom-fitted to the patient. If you properly maintain your dentures they will appear natural and provide a perfect smile. Additionally, dentures help strengthen muscles controlling your expressions that require the support of your teeth, rid you of pronunciation problems caused by missing teeth and aid with chewing.

How are dentures accomplished?

It is somewhat common to require for some teeth to be extracted, and surgery in some cases is necessary to improve the bony ridges that stabilize your dentures.

The procedure begins with a wax bite impression of your mouth that will give your dentist exacting measurements. A try-on appointment will fine tunes color, shape, and custom-fit.

After your final dentures are fabricated, they will be placed and informed of their required care.

Complete Dentures

These replace all of your teeth, upper or lower. Their comfort depends on muscle, bones, tongue, and saliva. Patients begin wearing conventional dentures after healing the teeth that were pulled.

Immediate Dentures

Immediate Dentures are placed all at once, and may require additional adjustments after the healing process. It can take months for your bone and tissue to stabilize after tooth extractions.

Upper Dentures

Upper Dentures, tend to be a bit easier to adjust to. These are made of the same materials as a Complete Denture, but are designed to provide you with upper teeth only.

Over Dentures

Over Dentures are a type of conventional denture similar to Complete Dentures. The difference is that not all teeth are extracted and they use one or more natural teeth for their support. This type provides greater stabilization during chewing. Over Dentures cost more and typically require more preparation dental appointments until the procedure is fully complete.

Partial Dentures

Designed to correct the gaps in your smile when only some of your teeth are missing. Metal attachments anchor the dentures to your natural teeth. Partial Dentures maintain tooth alignment by preventing your remaining teeth from shifting. Partial Dentures can also help prevent your loss of more teeth due to decay or gum disease.



Who is a candidate for dental caps?

If you grind your teeth, have an improper bite, have fillings or tooth decay you have contributing factors to the wearing down, cracking or breakage of your teeth. Dental caps cover the entire visible surface of your affected tooth and add strength, durability and stability.

A cosmetic dentist will usually be able to identify problem areas in your mouth that might lead to tooth damage and a need for caps. Chewing patterns play a big role too. By selectively grinding the tips of your middle and back teeth (cusps) will alter your bite to reduce the stress on your at-risk teeth.

Types of Tooth Caps

There are generally three types of caps - those made of gold, ceramic caps and ceramic-veneered gold caps. Gold and metal-ceramic caps are extremely durable and are normally used in molars, where the forces from chewing and grinding are most prevalent. Ceramic caps are used primarily for front teeth, since they can best resemble the natural tooth color and are more pleasing to the eye.

Types of Porcelain used with Dental Caps
There are basically two types of porcelain you're likely to hear and read about most when researching dental caps and crowns- the felspathic and pressed ceramic porcelains. The felspathic type is the original method that has been around for 20 years. A Ceramist in a dental lab bakes porcelain onto tin foil and then heats it in an oven. The Ceramist is able to create tints and opaques inside the porcelain of the dental cap or crown to give the natural look we seek.

Pressed ceramic is created from a single ingot. The single ingot is milled in one piece to create the desired shape of the cap or crown. The stains and opaques are applied only to the surface of the porcelain to give a natural look for your new smile.

Resin and Porcelain Caps
The new reinforced resin or bonded all-porcelain type of cap has the nicest appearance. This cap can be made from pure ceramic or a new reinforced composite resin. It is almost indistinguishable from natural teeth. The new bonding technology involved provides an exceptional bond your tooth. It is metal-free, and thus satisfies the needs of patients with metal sensitivities. When correcting your back teeth with bonding, the cosmetic dentist will perform a tooth colored onlay. This type of procedure is used to correct only the parts of your tooth that are in need. This procedure is metal-free.

Caps Made of Gold
Gold caps are used when appearance is not a priority to you. The gold is extremely workable, making gold caps a more precise fit than any other type. While there exists a slight possibility of chipping with porcelain caps, gold caps provide no such possibility.

Porcelain and Metal Caps
For a very natural appearance, porcelain fused to metal caps are the answer for you. However, they have a metal substructure and require an opaque below the porcelain, which can make the translucency of natural teeth difficult to match. Sometimes a darker line will be visible at the edge of the cap, near to your gum when your gum recedes with age.

Pros and Cons of Dental Caps Types

Dental caps in general add a good deal of strength to a weakened or worn tooth, and last ten to fifteen years. Depending on your habits and the condition of your gums, there may be some drawbacks for you. Your cosmetic dentist will advise which is best for you given several factors, such as how important appearance is to you. The following are the advantages and disadvantages of the most common types of caps.

Gold Caps

Advantage: The preparation of your tooth for a gold cap is the simplest and least complicated preparation. There is minimal tooth structure removal with as much as possible of the healthy tooth structure remaining untouched. As porcelain is hard by comparison, it may cause wear on opposing teeth over the years where gold is not as likely to do this. Gold is also easier to place to the area where the tooth and cap meet for a better fit. Gold is also a healthier environment for the gum tissue.

Disadvantage: The biggest disadvantage to gold caps is cosmetic, unless it is being used in the back of your mouth.

Porcelain Caps

Advantage: Porcelain caps or the new reinforced resin types are considered to be the most aesthetically pleasing, as it is so easily matched in color to your surrounding teeth.

Disadvantage: The thickness of the porcelain required for pleasing aesthetics also requires that more tooth structure is removed. Also, it is more difficult for your cosmetic dentist to get an ideal fit where your gum meets the cap. Gingival inflammation is typically more common with porcelain caps than gold caps.

Porcelain Fused-to-Metal Caps

Advantage: Porcelain fused-to-metal caps have a very natural and pleasing appearance.

Disadvantage: They have a metal substructure and require an opaque below the porcelain, which can make the translucency of natural teeth difficult to replicate. Occasionally a darker line will be visible at the edge of the cap, by your gum as your gum recedes with age.

What are dental implants?

Dental implants are fixtures of titanium which are surgically screwed into your jaw bone. The implant is an anchor for a naturally-appearing false tooth or a set of false teeth. The success rate of dental implants depends on where the implants are placed and their purpose. They are typically best placed in the front portion of your lower jaw. Implants are great for replacing missing teeth. It is important that you have enough bone in the area of the missing teeth for the implants to be attached to. Implants are not only used to replace one tooth, but rather people missing most, if not all, of their teeth benefit greatly as well. Implants are increasingly being used to replace certain types of bridges and removable partial dentures.

Who is a candidate for dental implants?

If you're missing one tooth or all of your teeth, implants may well be for you. So long as you have enough bone in the area of the missing tooth to facilitate the anchorage of the implants, this procedure can yield terrific results. If you don't have enough bone for this purpose, a bone graft may be necessary. If you have a small dental bridge or partial dentures (removable type), implants will be a welcome alternative. Implants are an alternative to a fixed bridge. The implant will last a lifetime, but the crown on top of it will last ten to fifteen years.

Overview of Dental Implants

Implants are surgically placed in your jaw bone while under anesthesia. It is a very time consuming procedure when having many implants placed. As this procedure is surgical, it is very important to research and find a well credited cosmetic dentist that you are comfortable with. For some people there are varying degrees discomfort or pain, which subsides in a couple of days. As with similar types of surgery, bruising and minor swelling might also develop shortly after the procedure.

How are Dental Implants Attached in Your Mouth?

The implant procedure is a surgical placement of the implant or implants in your jaw bone which requires a three to six month healing period before the implant restoration to replace the missing tooth or teeth. During this healing time, the bone grows in and around the titanium implant creating a very strong support. Dental implants can be rejected. Usually they are replaced with another implant of a slightly larger size. The rejection or "failure" rate is minimal, only 1 to 2% of all implant procedures. You must go without wearing your dentures for one day to two weeks after an implant placement. After the implant has "taken" and you have sufficiently healed, a very natural crown is placed on the implant.

When missing one tooth, your cosmetic dentist may use a Flipper to fill the space. A Flipper is a false tooth to temporarily take the place of a missing tooth before the permanent crown is placed on the implant. A Flipper can be attached via either a wire or a plastic piece that fits in the roof of your mouth. Flippers are meant to be a temporary solution while awaiting the permanent crown to be placed on your implant(s).

If you're missing one tooth or all of your teeth, implants may well be for you. So long as you have enough bone in the area of the missing tooth to facilitate the anchorage of the implants, this procedure can yield terrific results. If you don't have enough bone for this purpose, a bone graft may be necessary. A procedure of building up the bone is known as Bone Grafting. Bone grafting is common with dental implants. The bone that is used is one of three types. The preferred bone to use is taken from other areas of your mouth or collected in a suction device as the drilling of the sites for dental implants occurs. Sometimes bone is taken from areas such as a hip (this requires an orthopedic surgeon and an operating room). The third source for needed bone is a synthetic type. This is the least preferred type of bone to be used for this procedure.

How to choose the color of dental implants?

When considering dental implants a common question is how white the dental implants should be. Usually, the answer is to whiten your natural teeth to either the level of whiteness you want or to the brightest they can be. Your cosmetic dentist will then have the dental implants made to that color. Teeth are of course not monochromatic, so typically more than one color is used to create a very natural look. This color variation is critical in avoiding fake or artificial looking teeth. It is the internal contrast of colors that help create vitality. The internal play of light on the porcelain in the restoration helps to create this vitality. Surface texture is also very important, and helps to break up light reflections and make the dental implants look more natural.

There is no one standard system in the dental field to measure and determine tooth color. The most often heard about, however, is the Vita shade guide. This guide divides tooth color into four basic shade ranges:
A (reddish brown)
B (reddish yellow)
C (gray)
D (reddish gray).
In the A range there are five levels of darkness. Ranges B, C and D, each have four levels.

Not all of your teeth are the same natural color. Usually your eye teeth tend to be darker than the others, your front teeth are typically the whitest, and molars tend to be a shade between the two. The goal for everyone is to achieve their individual optimum whiteness while still looking natural.

Most dentists will show you a shade chart (like the above mentioned Vita Shade Guide) for you to pick from. Keep in mind, with a good cosmetic dentist this is merely a starting point. Other considerations when determining the color of dental implants for each patient are your complexion, hair color, the color of your natural teeth and even your eye color.

TOOTH BONDING

What is tooth bonding?

Bonding is a composite resin filling placed in the back teeth as well as the front teeth. Composites are the solution for restoring decayed teeth, making cosmetic improvements and even changing the color of your teeth or the reshaping of teeth. Bonding will lighten any stains you may have, close up minor gaps and can be used to correct crooked teeth. Basically, bonding will cover any natural flaws applying a thin coating of a plastic material on the front surface of your teeth. After this, your cosmetic dentist will apply a bonding material and sculpt, color and shape it to provide a pleasing result. A high-intensity light then hardens the plastic, and the surface is finely polished.

How is Tooth Bonding Accomplished?

A very mild etching solution is applied to your teeth to create very small crevices in the tooth's enamel structure. These small crevices provide a slightly rough surface permitting a durable resin to bond materials to your teeth. The resin is then placed on your tooth and high-intensity light cures the resins onto your tooth's surface - with each individual layer of resin hardening in just minutes. When the last coat has been applied to your tooth, the bonded material is then sculpted to fit your tooth and finely polished.

The resin comes in many shades so that we can match it to your natural teeth. Due to the layers involved, this procedure will take slightly longer than traditional silver fillings because multiple layers of the bonding material are applied. Typically bonding takes an hour to two hours depending on your particular case.

Who is a candidate for tooth bonding?

If you have close, small gaps between your front teeth, or if you have chipped or cracked teeth, you may be a candidate for bonding. Bonding is also used for patients who have discolored teeth, uneven teeth, gum recession or tooth decay. Bonding material is porous, so smokers will find that their bonding will yellow. If you think you are a candidate for bonding, discuss it with your dentist.

DENTAL BRIDGES

What is a dental bridge?

A dental bridge is a false tooth, known as a pontic, which is fused between two porcelain crowns to fill in the area left by a missing tooth. The two crowns holding it in place that are attached onto your teeth on each side of the false tooth. This is known as a fixed bridge. This procedure is used to replace one or more missing teeth. Fixed bridges cannot be taken out of your mouth as you might do with removable partial dentures.

In areas of your mouth that are under less stress, such as your front teeth, a cantilever bridge may be used. Cantilever bridges are used when there are teeth on only one side of the open space. Bridges can reduce your risk of gum disease, help correct some bite issues and even improve your speech. Bridges require your commitment to serious oral hygiene, but will last as many ten years or more.

Who is a candidate for dental bridges?

If you have missing teeth and have good oral hygiene practices, you should discuss this procedure with your cosmetic dentist. If spaces are left unfilled, they may cause the surrounding teeth to drift out of position. Additionally, spaces from missing teeth can cause your other teeth and your gums to become far more susceptible to tooth decay and gum disease.

Overview of dental bridge procedure

If you a space from a missing tooth, a bridge will be custom made to fill in the space with a false tooth. The false tooth is attached by the bridge to the two other teeth around the space - bridging them together.

How is dental bridge accomplished?

Your cosmetic dentist will prepare your teeth on either side of the space for the false tooth. You will be given a mild anesthetic to numb the area, and the cosmetic dentist will remove the an area of each abutment (teeth on either side of the space) to accommodate for the thickness of the crown. When these teeth already have fillings, part of the filling may be left in place to help as a foundation for the crown.

The dentist will then make an impression, which will serve as the model from which the bridge, false tooth and crowns will be made by a dental laboratory. A temporary bridge will be placed for you to wear while your bridge is being made until your next visit. This temporary bridge will serve to protect your teeth and gums.

Your cosmetic dentist may have you use a Flipper appliance. A Flipper is a false tooth to temporarily take the place of a missing tooth before the permanent bridge is placed. A Flipper can be attached via either a wire or a plastic piece that fits in the roof of your mouth. Flippers are meant to be a temporary solution while awaiting the permanent bridge.

On your second appointment, the temporary bridge will be removed. Your new permanent bridge will be fitted and checked and adjusted for any bite discrepancies. Your new bridge will then be cemented to your teeth.

Types of Dental Bridge Procedures

There are three types of dental bridges:

Traditional Fixed Bridge

A dental bridge is a false tooth, known as a potic, which is fused between two porcelain crowns to fill in the area left by a missing tooth. There two crowns holding it in place that are attached onto your teeth on each side of the false tooth. This is known as a fixed bridge. This procedure is used to replace one or more missing teeth. Fixed bridges cannot be taken out of your mouth as you might do with removable partial dentures.

Resin Bonded Bridges

The resin bonded is primarily used for your front teeth. Less expensive, this bridge is best used when the abutment teeth are healthy and don't have large fillings. The false tooth is fused to metal bands that are bonded to the abutment teeth with a resin which is hidden from view. This type of bridge reduces the amount of preparation on the adjacent teeth.

Cantilever Bridges

In areas of your mouth that are under less stress, such as your front teeth, a cantilever bridge may be used. Cantilever bridges are used when there are teeth on only one side of the open space. This procedure involves anchoring the false tooth to one side over one or more natural and adjacent teeth.

How much do dental bridges cost?

The average cost of a single fixed bridge depends on many factors, from which region you're in to how many and which type of bridges are needed. Typically dental bridge cost ranges from $500-900 per tooth. Dental insurance typically pays for about half of the cost of the bridge.

Pros and Cons of a Dental Bridge

Advantages of dental bridges:
Bridges are natural in appearance, and usually require only two visits to your dentist. If you maintain good oral hygiene, your fixed bridge should last as many as ten years or more.

Disadvantages of having a dental bridge:
It is common for your teeth to be mildly sensitive to extreme temperatures for a few weeks after the treatment. The build up of bacteria formed from food acids on your teeth and gums can become infected if proper oral hygiene is not followed.

TOOTH CROWNS

What are Tooth Crowns?

Grinding your teeth, an improper bite, age, fillings and tooth decay can all be contributing factors in the wearing down, cracking or breakage of your teeth. Dental crowns cover the entire visible surface of your affected tooth and add strength, durability and tooth stability.

Types of Tooth Crowns
There are basically three types of crowns, those made of gold, ceramic crowns and ceramic-veneered gold crowns. Gold and metal-ceramic crowns are extremely durable and are normally used in molars, where the forces from chewing and grinding are most prevalent. Ceramic crowns are used primarily for front teeth, since they can best resemble the natural tooth color.

Resin and Porcelain Crowns
The new reinforced resin or bonded all-porcelain type of crown has the nicest appearance. This crown can be made from pure ceramic or a new reinforced composite resin, and is almost indistinguishable from natural teeth. The new bonding technology involved provides an exceptional bond your tooth. It is metal-free, and thus satisfies the needs of patients with metal sensitivities. When correcting your back teeth with bonding, the cosmetic dentist will perform a tooth colored onlay. This type of procedure is used to correct only those parts of the tooth that are in need. This is a metal-free procedure.

Crowns Made of Gold
Gold crowns are appropriate when appearance is not a priority to you. The gold metal is extremely workable making gold crowns a more precise fit than any other type. While there exists a slight possibility of chipping with porcelain crowns, gold crowns provide no such possibility.

Porcelain and Metal Crowns
For a very natural appearance, porcelain fused to metal crowns are the answer. However, they have a metal substructure and require an opaque below the porcelain. This can make the translucency of natural teeth difficult to replicate. Occasionally a darker line will be visible at the edge of the crown, near to your gum when it recedes with age.

Types of Porcelain
There are basically two types of porcelain you're likely to hear and read about most - the felspathic and pressed ceramic porcelains. The felspathic type is the original method that has been around for 20 years. A Ceramist in a dental lab bakes porcelain onto tin foil and then heats it in an oven. The Ceramist is able to create tints and opaques inside the porcelain to give the natural look we seek.

Pressed ceramic is created from a single ingot. The single ingot is milled in one piece to create the desired shape. The stains and opaques are applied only to the surface of the porcelain to give a natural look.

   

Member login | Contact Us | FAQ | Copyright perfectdentists.com All rights reserved 2004 | Terms and conditions | About us | Mon 24, Nov 2014 6:38am