Cosmetic Dentistry Lahore Punjab

Country: Pakistan
State: Punjab
City: Lahore

What causes discoloration of the teeth?

Teeth enamel discoloration can be caused by staining, aging, or chemical damage to teeth. Some of the more common causes of teeth discoloration are medications, coffee, tea or cigarettes. People who drink significant amounts of cola soft drinks can experience similar staining.

Aside from staining, there are other factors that can affect the color of an individual's teeth. Genetics can play a role. Some people have naturally brighter enamel than others. Disease can also be a factor and certain medications can cause a discoloration of the teeth. If you suspect that there is an underlying medical cause for your teeth discoloration, be sure to inform your cosmetic dentist.

How long does teeth whitening last?

Teeth whitening is not a permanent procedure. Results can last for one to or more years, depending upon your personal habits. In most cases, the whitening procedure is very effective and the patient is pleased with the results.

Types of Teeth Whitening Procedures

There are a few teeth whitening procedures available that correct discoloration of the teeth by removing the brown and yellow staining. While each work effectively, there are advantages and disadvantages to each procedure dependent upon your objectives and commitment to the processes. The type of procedures available should be discussed with your cosmetic dentist, and a they will recommend the most appropriate teeth whitening procedure for you.

BRITESMILE TEETH WHITENING (In-Office)
Using a specail light with a whitening gel, this is an in-office bleaching system. It is often followed up with an at-home bleaching kit if needed.

The translucent bleaching gel is applied to the teeth and a specail activating light source is used to activate the crystals to absorb the energy from the light and penetrate the teeth enamel to increase the lightening effect on the teeth. The length of time in the cosmetic dentist's chair depends on the degree of discoloration you have, but two hours is common.

Advantage: One visit is usually all it takes for a bright smile. The tooth whitening treatment typically costs $600.

Disadvantage: The sudden change of color is likely to be noticed by those around you immediately.

LASER BLEACHING (In-Office)
Using a laser with a whitening gel, this is an in-office bleaching system.

The translucent bleaching gel is applied to the teeth and a laser light is used to activate the crystals to absorb the energy from the light and penetrate the teeth enamel to increase the lightening effect on the teeth. The length of time in the cosmetic dentist's chair depends on the degree of discoloration you have.

Advantage: One visit is usually all it takes for a bright smile.

Disadvantage: The sudden change of color is likely to be noticed by those around you immediately. This is the more expensive of the procedures available, but also the quickest.

LASER BLEACHING (In-Office)
Using a laser with a whitening gel, this is an in-office bleaching system.

The translucent bleaching gel is applied to the teeth and a laser light is used to activate the crystals to absorb the energy from the light and penetrate the teeth enamel to increase the lightening effect on the teeth. The length of time in the cosmetic dentist's chair depends on the degree of discoloration you have.

Advantage: One visit is usually all it takes for a bright smile.

Disadvantage: The sudden change of color is likely to be noticed by those around you immediately. This is the more expensive of the procedures available, but also the quickest.

CUSTOM FIT TRAY BLEACHING (In-Home)
A custom fitted tray is worn over your teeth. A small amount of the bleaching gel is placed in the tray and worn for a brief amount of time each day. This is the most common technique because it's easy to use and costs less. Impressions are taken of your mouth and a thin custom made plastic tray is made which you take home and wear for about one to two hours per day. While some results may be seen in a couple days, it usually takes one to two weeks to see the full whitening of your teeth. This procedure is sometimes used in conjunction with the in-office laser bleaching if you have severe discoloration (dark grey or purple) or internal teeth staining.

Advantage: A gradual whitening of your teeth over time will be less noticeable to others that you're undergoing this procedure. The cost is relatively low.

Disadvantages: This procedure will require two to four visits to the cosmetic dentists office.

There are a few teeth whitening procedures available that correct discoloration of the teeth by removing the brown and yellow staining. While each work effectively, there are advantages and disadvantages to each procedure dependent upon your objectives and commitment to the processes. The type of procedures available should be discussed with your cosmetic dentist, and a they will recommend the most appropriate teeth whitening procedure for you.

LASER BLEACHING (In-Office)
Using a laser with a whitening gel, this is an in-office bleaching system. The translucent bleaching gel is applied to the teeth and a laser light is used to activate the crystals to absorb the energy from the light and penetrate the teeth enamel to increase the lightening effect on the teeth. The length of time in the cosmetic dentist's chair depends on the degree of discoloration you have.

Advantage: One visit is usually all it takes for a bright smile.

Disadvantage: The sudden change of color is likely to be noticed by those around you immediately. This is the more expensive of the procedures available, but also the quickest.

Pros and Cons of Teeth Whitening

Advantages:
People typically have their teeth whitened to improve their appearance. Whiter teeth are associated with beauty and a healthier lifestyle. When people have a brighter smile, they tend to smile more often and are less self-conscious.

In addition, a whiter smile tends to minimize the appearance of facial wrinkles, giving way to a more youthful and energetic appearance.

Finally, a whiter smile gives people to whom you are speaking a place to focus on and gives you a friendlier appearance.

Disadvantages:

Although bleaching is very effective, there can be short term disadvantages, such as sore gums or teeth from the bleach. This disappears when bleach use is discontinued. Some individuals are more chemically sensitive. If you are one of them, inform your cosmetic dentist so that you can be tested for sensitivity to the solution.

Research indicates that bleaching is completely effective in more than 78% of people. In cases of serious teeth discoloration, bleaching may not be the best choice. Veneers or crowns may be the superior choice. Bleaching is usually the first solution to try due to its lower cost.

Some people experience discomfort from wearing the mouth tray. This typically goes away in short order, but if you suspect that there is a problem with the fit of your mouth tray, call your dentist's office. They can often make small adjustments that will minimize or eliminate the problem.

What causes discoloration of the teeth?

Teeth enamel discoloration can be caused by staining, aging, or chemical damage to teeth. Some of the more common causes of teeth discoloration are medications, coffee, tea or cigarettes. People who drink significant amounts of cola soft drinks can experience similar staining.

Aside from staining, there are other factors that can affect the color of an individual's teeth. Genetics can play a role. Some people have naturally brighter enamel than others. Disease can also be a factor and certain medications can cause a discoloration of the teeth. If you suspect that there is an underlying medical cause for your teeth discoloration, be sure to inform your cosmetic dentist.

COSMETIC GUM SURGERY

What is cosmetic gum surgery?

Your gum tissue is like a frame that provides form and shape to the top of your tooth. A less than attractive smile results when the integrity of the gum is compromised or the actual gum between your teeth becomes weak. Usually due to poor hygiene (gum disease), you actually begin to lose gum tissue. Cosmetic dentistry provides many cosmetic solutions such as composite resin bonding, crowns, and veneers to create a great smile. These solutions are usually part of an overall strategy which may involve cosmetic gum surgery. Used to correct a 'gummy smile' (a significant portion of your gum is exposed when you smile), cosmetic gum surgery is the procedure of lengthening your teeth from the neck of the tooth upwards. Your teeth then appear to be longer and much less gum is seen when you smile.

The "Long in the Tooth" Smile - Cosmetic gum surgery, or periodontal plastic surgery, can correct almost any deformity or gingival problems preventing you from a beautiful smile. As we age, our gums may shrink and recede which makes our teeth look longer. While this is often age-related, it can also occur due to a bad bite. A cosmetic dentist or a periodontist can correct this to such an extent, that you'll have a very youthful appearing smile.

The "Gummy Smile" - This is a problem where your teeth appear to be too short. Gum sculpting is often the solution. To solve this, a dentist uses a laser to remove the excess tissue of your "gummy" smile, which then exposes more of your tooth.

Who is a candidate for cosmetic gum surgery?
You should consult your dentist about cosmetic gum surgery if you believe you have "Gummy Smile" (small crown length), gum recession "long teeth", an uneven gum line due to "short teeth", gum loss or gums which appear to be collapsing (from missing teeth), dark or black areas between bridges, implants, crowns or teeth, or tooth sensitivity from receding gums.

There are two primary procedures for cosmetic gum surgery, depending on your current smile.

"Gummy Smile" (Excessive Gingival Display)
A "Gummy Smile" can occur due to wear of teeth from teeth grinding, a short upper lip, or having a longer than usual upper jawbone. This smile is when your teeth appear too small and your gums appear to large.

"Long Tooth Smile" (Gum Recession)
As your gums recede, your teeth appear longer than normal. While "long teeth" may result in an unattractive smile, you should also be concerned with root sensitivity and possible tooth loss. Recent advances in techniques and materials have resulted in significant improvements in both comfort, predictability and esthetics.

To Correct a "Gummy Smile"
Cosmetic gum surgery can be done to reduce the excess gum and bone. The removal of these tissues allows for normal sized teeth and for a normal gum line appearance by using an instrument, usually a laser, to remove the undesirable tissue. Typically your cosmetic dentist will prescribe an antibacterial mouth rinse to be used twice a day for a two-week period following your surgery.

To Correct a "Long Tooth Smile"
As your gums recede, your teeth look much "longer" than normal. Such gum recession exposes your sensitive root surface which often makes hot or cold foods and drinks a painful experience. Teeth can become loose as your gum recedes. The cosmetic gum surgery solution is basically when a cosmetic dentist or periodontist removes tissue from the roof of your mouth and then grafts it onto your gum line. This tissue then reinforces thin gums or fills in areas where your gums have receded. Typically your cosmetic dentist will prescribe an antibacterial mouth rinse to be used twice a day for a two-week period following your surgery.

How are Dental Root Canals Performed?

Depending on the number of teeth and severity affected, root canals usually require one to two visits not including any follow-up visits. Your dentist or endodontist will numb the area around the affected tooth, or may offer you the option of mild sedation. The tooth is then drilled to the pulp area either through the top or the back of the tooth. The actual root canals are measured after some of the pulp has been removed. This is done so that the dentist can clean the entire canal, and so that enough of the filling material will be used to completely fill the canal. The actual measuring is done with either x-rays or electronic imaging devices.

All of the diseased pulp in the tooth is removed, and the canal is cleaned out thoroughly with an antiseptic solution. This solution will clean all of the canals within the tooth. The canals are then filled with gutta percha, a flexible plastic material. A temporary filling is then put on top of that. A crown or permanent filling will be done after there has been no sign of infection. Crowns are most common since the root canal procedure weakens the tooth. The crown is usually placed as soon as possible, within a month or less.

Expect two to three days of soreness after the procedure, or longer if the infection in the root canal was severe.

Types of Root Canals

There are generally two types of root canal procedures. The first (and hopefully only) root canal on a tooth, and the second root canal on the same tooth. Both procedures are the same, other than that if this is the second root canal done on the same tooth it requires more time and expense. This is because your dentist must remove all of the previous filling in the canal and pulp area in order to start again.

How much do dental root canals cost?

Expect the cost of a root canal treatment to be about $400. to $600. per front tooth and about $500. to $800. for a molar. The difference is because front teeth usually have only one root canal and molars usually have three or more. The costs for a crown or permanent filling are additional. Costs for a second root canal, hopefully not needed, on the same tooth are slightly higher.

Who is a candidate for Dental Veneers?

Veneers, porcelain or plastic, are placed over the front teeth to change color shape of the teeth. Veneers are ideal for teeth that are too small, too big, or have uneven surfaces. It is very common for people to have imperfect teeth, either oddly shaped teeth, chipped teeth, crooked teeth,teeth with small holes in them, or an inappropriate sized tooth or teeth that have an odd appearance. Veneers solve such irregularities and create a durable and pleasing smile.

Types of Tooth Veneer Procedures:

There are two tooth veneers procedures available that correct discoloration of the teeth by removing the brown and yellow staining. While each work effectively, there are advantages and disadvantages to each procedure dependent upon your objectives and commitment to the processes. The type of procedures available should be discussed with your cosmetic dentist, and a they will recommend the most appropriate tooth veneers procedure for you.

Composite Veneer Procedure:

Composite (direct) veneers are usually performed in a single visit to your cosmetic dentist. The procedure is an application of a bond and enamel directly to the tooth's surface.

Porcelain Veneer Procedure:

Porcelain (indirect) veneers are a very thin porcelain material. Usually porcelain veneers require two visits and also require a dental laboratory to create the final tooth restoration piece.

How much do tooth veneers cost?

Porcelain Veneers typically cost between $900 - $2,500. per tooth and require two or more visits one to two weeks apart. Veneers made of porcelain provide a greater longevity than plastic, typically ten years to fifteen years or more.

Composite Veneers cost significantly less, around $250 per tooth or more, but only last from five to seven years typically.

Generally speaking, the price of tooth veneers and whitening increases with the number of in-office treatments required by the patient. Dental insurance does not typically cover the cost of the tooth veneers procedure.

Who is a candidate for tooth contouring and reshaping?

If you want your teeth to appear less crowded, lack chips and fractures, have decreased overlaps or to be without pits or grooves in the enamel, this procedure should be discussed with your cosmetic dentist. With a little dental contouring, you can make a huge difference in the way you feel about your smile. Good cosmetic dentistry can give you a smile that is the envy of others. Tooth contouring by a cosmetic dentist does require that you have normal, healthy teeth.

Tooth reshaping, or tooth sculpting, is a safe and conservative way to improve your smile. Teeth may become weaker if large amounts of enamel are removed, tooth reshaping should be limited to minor changes or combined with veneers or bonding for the best smile.

Who is a candidate for dentures?

If you've lost, or are losing, all of your teeth a Complete Denture is something to discuss with your cosmetic dentist. If some of your teeth remain and are healthy, a partial denture may be your way to a great smile.

This procedure should be thoroughly discussed with your dentist as there are several personal and medical factors to take into consideration. You may instead be a candidate for dental bridges and dental implants as optional procedures.



Who is a candidate for dental caps?

If you grind your teeth, have an improper bite, have fillings or tooth decay you have contributing factors to the wearing down, cracking or breakage of your teeth. Dental caps cover the entire visible surface of your affected tooth and add strength, durability and stability.

A cosmetic dentist will usually be able to identify problem areas in your mouth that might lead to tooth damage and a need for caps. Chewing patterns play a big role too. By selectively grinding the tips of your middle and back teeth (cusps) will alter your bite to reduce the stress on your at-risk teeth.

Types of Tooth Caps

There are generally three types of caps - those made of gold, ceramic caps and ceramic-veneered gold caps. Gold and metal-ceramic caps are extremely durable and are normally used in molars, where the forces from chewing and grinding are most prevalent. Ceramic caps are used primarily for front teeth, since they can best resemble the natural tooth color and are more pleasing to the eye.

Types of Porcelain used with Dental Caps
There are basically two types of porcelain you're likely to hear and read about most when researching dental caps and crowns- the felspathic and pressed ceramic porcelains. The felspathic type is the original method that has been around for 20 years. A Ceramist in a dental lab bakes porcelain onto tin foil and then heats it in an oven. The Ceramist is able to create tints and opaques inside the porcelain of the dental cap or crown to give the natural look we seek.

Pressed ceramic is created from a single ingot. The single ingot is milled in one piece to create the desired shape of the cap or crown. The stains and opaques are applied only to the surface of the porcelain to give a natural look for your new smile.

Resin and Porcelain Caps
The new reinforced resin or bonded all-porcelain type of cap has the nicest appearance. This cap can be made from pure ceramic or a new reinforced composite resin. It is almost indistinguishable from natural teeth. The new bonding technology involved provides an exceptional bond your tooth. It is metal-free, and thus satisfies the needs of patients with metal sensitivities. When correcting your back teeth with bonding, the cosmetic dentist will perform a tooth colored onlay. This type of procedure is used to correct only the parts of your tooth that are in need. This procedure is metal-free.

Caps Made of Gold
Gold caps are used when appearance is not a priority to you. The gold is extremely workable, making gold caps a more precise fit than any other type. While there exists a slight possibility of chipping with porcelain caps, gold caps provide no such possibility.

Porcelain and Metal Caps
For a very natural appearance, porcelain fused to metal caps are the answer for you. However, they have a metal substructure and require an opaque below the porcelain, which can make the translucency of natural teeth difficult to match. Sometimes a darker line will be visible at the edge of the cap, near to your gum when your gum recedes with age.

Pros and Cons of Dental Caps Types

Dental caps in general add a good deal of strength to a weakened or worn tooth, and last ten to fifteen years. Depending on your habits and the condition of your gums, there may be some drawbacks for you. Your cosmetic dentist will advise which is best for you given several factors, such as how important appearance is to you. The following are the advantages and disadvantages of the most common types of caps.

Gold Caps

Advantage: The preparation of your tooth for a gold cap is the simplest and least complicated preparation. There is minimal tooth structure removal with as much as possible of the healthy tooth structure remaining untouched. As porcelain is hard by comparison, it may cause wear on opposing teeth over the years where gold is not as likely to do this. Gold is also easier to place to the area where the tooth and cap meet for a better fit. Gold is also a healthier environment for the gum tissue.

Disadvantage: The biggest disadvantage to gold caps is cosmetic, unless it is being used in the back of your mouth.

Porcelain Caps

Advantage: Porcelain caps or the new reinforced resin types are considered to be the most aesthetically pleasing, as it is so easily matched in color to your surrounding teeth.

Disadvantage: The thickness of the porcelain required for pleasing aesthetics also requires that more tooth structure is removed. Also, it is more difficult for your cosmetic dentist to get an ideal fit where your gum meets the cap. Gingival inflammation is typically more common with porcelain caps than gold caps.

Porcelain Fused-to-Metal Caps

Advantage: Porcelain fused-to-metal caps have a very natural and pleasing appearance.

Disadvantage: They have a metal substructure and require an opaque below the porcelain, which can make the translucency of natural teeth difficult to replicate. Occasionally a darker line will be visible at the edge of the cap, by your gum as your gum recedes with age.

Overview of Dental Implants

Implants are surgically placed in your jaw bone while under anesthesia. It is a very time consuming procedure when having many implants placed. As this procedure is surgical, it is very important to research and find a well credited cosmetic dentist that you are comfortable with. For some people there are varying degrees discomfort or pain, which subsides in a couple of days. As with similar types of surgery, bruising and minor swelling might also develop shortly after the procedure.

How are Dental Implants Attached in Your Mouth?

The implant procedure is a surgical placement of the implant or implants in your jaw bone which requires a three to six month healing period before the implant restoration to replace the missing tooth or teeth. During this healing time, the bone grows in and around the titanium implant creating a very strong support. Dental implants can be rejected. Usually they are replaced with another implant of a slightly larger size. The rejection or "failure" rate is minimal, only 1 to 2% of all implant procedures. You must go without wearing your dentures for one day to two weeks after an implant placement. After the implant has "taken" and you have sufficiently healed, a very natural crown is placed on the implant.

When missing one tooth, your cosmetic dentist may use a Flipper to fill the space. A Flipper is a false tooth to temporarily take the place of a missing tooth before the permanent crown is placed on the implant. A Flipper can be attached via either a wire or a plastic piece that fits in the roof of your mouth. Flippers are meant to be a temporary solution while awaiting the permanent crown to be placed on your implant(s).

If you're missing one tooth or all of your teeth, implants may well be for you. So long as you have enough bone in the area of the missing tooth to facilitate the anchorage of the implants, this procedure can yield terrific results. If you don't have enough bone for this purpose, a bone graft may be necessary. A procedure of building up the bone is known as Bone Grafting. Bone grafting is common with dental implants. The bone that is used is one of three types. The preferred bone to use is taken from other areas of your mouth or collected in a suction device as the drilling of the sites for dental implants occurs. Sometimes bone is taken from areas such as a hip (this requires an orthopedic surgeon and an operating room). The third source for needed bone is a synthetic type. This is the least preferred type of bone to be used for this procedure.

Types of Dental Implant Procedures

Implants rely on titanium fixtures inserted into the jawbone. Most implants are made of titanium, which is very effective at fusing with living bone (osseointegration). There are three types of dental implants which your cosmetic dentist will discuss with you:

Root Form Implant

This screw type implant is shaped like the root of a tooth. This is the most commonly used implant and is used where there is plenty of width and depth to your jawbone. If your jawbone is too narrow or short for placement of the Root Form implants, bone grafting may be needed to allow for their placement. After you've received anesthesia, your cosmetic dentist will expose an area of your jawbone and prepare the bone for the implant. The number of incisions and bone preparations depend on how many implants you need. The implant will be set into place and your gums are closed with stitches. It will take three to six months for healing. After you've fully healed, your implant is uncovered and an abutment is attached.

Plate Form Implant

If your jawbone is too narrow for bone grafting, a Plate Form implant is placed into your jawbone. The Plate Form implant is unique for this purpose as it has a flat and long shape for a better fit into a narrow jawbone. After you've received anesthesia, your cosmetic dentist will expose an area of your jawbone and prepare the bone for the implant. The number of incisions and bone preparations depend on how many implants you need. The implant will be set into place and your gums are closed with stitches. It will take three to six months for healing (some Plate Form implants are immediately ready for restoration without the long healing process).

Subperiosteal Implants

If there's not enough bone width or height for the Root Form or Plate Form implants, the Subperiosteal implant is recommended. The Subperiosteal implant is custom made to rest on top of your jawbone and under your gums like the Plate Form implant, but the Subperiosteal implant is placed through one of two special methods.

The first method of placement involves your cosmetic dentist making an impression of your jawbone. After you've received anesthesia, your cosmetic dentist exposes your jawbone and takes an impression of it. The impression is used by a dental laboratory to make a custom-fit implant for your jaw. The next procedure, after your custom-fit implant is created, is to again expose your jawbone and place the implant. Your gums are then closed with stitches and replacement teeth are installed.

The second method of placement requires a CAT scan of your jawbone. Through computer modeling techniques, a model of your jawbone is made from the CAT information. The next procedure, after your custom-fit Subperiosteal implant is created by a dental laboratory, is to again expose your jawbone and place the implant. Your gums are then closed with stitches and replacement teeth are installed.

Pros and Cons of Dental Implants

Advantages:
As our life span increases, a permanent dental replacement like implants is increasingly important as we get older. While dentures and removable bridges are usually loose and unstable, implants provide you with dental replacements that are both natural looking and very functional. Implants look much better, and feel better, than traditional removable bridges, and offer the same force for biting as bridges that are fixed in place. Implants will last your lifetime.

Disadvantages:
Implants are a major investment and not without risk. The extensive use of implants can cost tens of thousands of dollars to achieve a great result. It is also a very time consuming procedure when having many implants placed. As this procedure is surgery, it is very important to research and find a well credited cosmetic dentist that you are comfortable with. For some people there are varying degrees discomfort or pain, which subsides in a couple of days. As with similar types of surgery, bruising and minor swelling might also develop shortly after the procedure. The crown (false tooth placed on top) will need to be replaced in ten to fifteen years.

How to choose the color of dental implants?

When considering dental implants a common question is how white the dental implants should be. Usually, the answer is to whiten your natural teeth to either the level of whiteness you want or to the brightest they can be. Your cosmetic dentist will then have the dental implants made to that color. Teeth are of course not monochromatic, so typically more than one color is used to create a very natural look. This color variation is critical in avoiding fake or artificial looking teeth. It is the internal contrast of colors that help create vitality. The internal play of light on the porcelain in the restoration helps to create this vitality. Surface texture is also very important, and helps to break up light reflections and make the dental implants look more natural.

There is no one standard system in the dental field to measure and determine tooth color. The most often heard about, however, is the Vita shade guide. This guide divides tooth color into four basic shade ranges:
A (reddish brown)
B (reddish yellow)
C (gray)
D (reddish gray).
In the A range there are five levels of darkness. Ranges B, C and D, each have four levels.

Not all of your teeth are the same natural color. Usually your eye teeth tend to be darker than the others, your front teeth are typically the whitest, and molars tend to be a shade between the two. The goal for everyone is to achieve their individual optimum whiteness while still looking natural.

Most dentists will show you a shade chart (like the above mentioned Vita Shade Guide) for you to pick from. Keep in mind, with a good cosmetic dentist this is merely a starting point. Other considerations when determining the color of dental implants for each patient are your complexion, hair color, the color of your natural teeth and even your eye color.

How long does tooth bonding last?

While the traditional silver fillings last about seven years, these composites should last about seven to eleven years.

How is Tooth Bonding Accomplished?

A very mild etching solution is applied to your teeth to create very small crevices in the tooth's enamel structure. These small crevices provide a slightly rough surface permitting a durable resin to bond materials to your teeth. The resin is then placed on your tooth and high-intensity light cures the resins onto your tooth's surface - with each individual layer of resin hardening in just minutes. When the last coat has been applied to your tooth, the bonded material is then sculpted to fit your tooth and finely polished.

The resin comes in many shades so that we can match it to your natural teeth. Due to the layers involved, this procedure will take slightly longer than traditional silver fillings because multiple layers of the bonding material are applied. Typically bonding takes an hour to two hours depending on your particular case.

Types of Tooth Bonding Procedures

There are two types of bonding. What type is indicated in your situation depends upon whether you have a small area or a larger area that requires correction.

For small corrections

These are one appointment fillings which are color-matched to the tooth and are bonded to the surface for added strength. These are most appropriate for small fillings and front fillings as they may not be as durable for large fillings.

For larger corrections

Dental lab-created tooth-colored fillings require two appointments and involve making a mold of your teeth and placing a temporary filling. A dental laboratory then creates a very durable filling to custom-fit the mold made from your teeth. These fillings are typically made of porcelain. The custom-fit filling is then bonded to your tooth on your return visit. This type is even more natural looking, more durable and more stain resistant.

How much does tooth bonding cost?

As with all procedures, prices vary depending on your location. The cost of dental bonding will also vary with the extent of the bonding process you need. Many dental insurance plans cover most of the cost of the bonding, particularly when it is done for structural reasons.

The average cost of cosmetic dental bonding ranges from $300 to $600 per tooth.

Pros and Cons of Tooth Bonding

Advantages of dental bonding:
Esthetics is the big advantage over silver fillings. As silver does not stick to teeth, entirely healthy tooth structure is usually removed to keep a silver filling in place. Composites permit your cosmetic dentist to remove only the decayed area of your tooth. Unlike silver fillings, composite bonding expand just like your teeth and are much less likely to cause cracks in your tooth. Composites bond directly to the tooth providing support. Composites can be used to fill in cracks, chips and gaps - and will match the color of your other teeth.

Disadvantages of the dental bonding procedures:
Bonding with composites simply costs more in material and time.

DENTAL BRIDGES

What is a dental bridge?

A dental bridge is a false tooth, known as a pontic, which is fused between two porcelain crowns to fill in the area left by a missing tooth. The two crowns holding it in place that are attached onto your teeth on each side of the false tooth. This is known as a fixed bridge. This procedure is used to replace one or more missing teeth. Fixed bridges cannot be taken out of your mouth as you might do with removable partial dentures.

In areas of your mouth that are under less stress, such as your front teeth, a cantilever bridge may be used. Cantilever bridges are used when there are teeth on only one side of the open space. Bridges can reduce your risk of gum disease, help correct some bite issues and even improve your speech. Bridges require your commitment to serious oral hygiene, but will last as many ten years or more.

How much do dental bridges cost?

The average cost of a single fixed bridge depends on many factors, from which region you're in to how many and which type of bridges are needed. Typically dental bridge cost ranges from $500-900 per tooth. Dental insurance typically pays for about half of the cost of the bridge.

Who is a candidate for Tooth Crowns?

Grinding your teeth, an improper bite, age, fillings and tooth decay can all be contributing factors in the wearing down, cracking or breakage of your teeth. Dental crowns cover the entire visible surface of your affected tooth and add strength, durability and tooth stability.

Your cosmetic dentist will usually be able to spot problem areas in your mouth that might lead to tooth damage and a need for crowns. Chewing patterns play a big role as well. By selectively grinding the tips of your middle and back teeth (called cusps) will alter your bite to reduce the stress on at-risk teeth.

In other instances, crowns are used to replace a actual missing tooth. These crowns are anchored to the teeth on either side, with a bridge section connecting the two crowns. Instead of bridges, single tooth dental implants may be used that eliminate the need for supporting the crowns.

How are Tooth Crowns Attached to your Tooth?

Your cosmetic dentist will make an impression of the tooth and a dental laboratory will create the crown. You will typically leave the office with a temporary crown to wear while the permanent crown is being made - this takes about two weeks. The permanent crown is then cemented onto your tooth. Typically, only two visits are required for this part of the procedure. Often, a preliminary restoration of your tooth may be needed before a crown can be placed. To stabilize your tooth, a filling must first be put in place prior to placing a crown due to the loss of original tooth structure. Tooth crowns usually last ten to fifteen years.

Be sure to discuss with your cosmetic dentist that the cement color used for your permanent crown will be the same as used for your temporary crown. A try in paste is used for this purpose. The color of the cement does affect the overall color of a porcelain crown, so this needs to be discussed long before your temporary crown is placed.

In some cases your cosmetic dentist may choose to use a Flipper instead of a temporary crown. A Flipper is a false tooth to temporarily take the place of a missing tooth before the permanent crown is placed. A Flipper can be attached via either a wire or a plastic piece that fits in the roof of your mouth. Flippers are meant to be a temporary solution while awaiting the permanent crown.

Types of Tooth Crowns
There are basically three types of crowns, those made of gold, ceramic crowns and ceramic-veneered gold crowns. Gold and metal-ceramic crowns are extremely durable and are normally used in molars, where the forces from chewing and grinding are most prevalent. Ceramic crowns are used primarily for front teeth, since they can best resemble the natural tooth color.

Resin and Porcelain Crowns
The new reinforced resin or bonded all-porcelain type of crown has the nicest appearance. This crown can be made from pure ceramic or a new reinforced composite resin, and is almost indistinguishable from natural teeth. The new bonding technology involved provides an exceptional bond your tooth. It is metal-free, and thus satisfies the needs of patients with metal sensitivities. When correcting your back teeth with bonding, the cosmetic dentist will perform a tooth colored onlay. This type of procedure is used to correct only those parts of the tooth that are in need. This is a metal-free procedure.

Crowns Made of Gold
Gold crowns are appropriate when appearance is not a priority to you. The gold metal is extremely workable making gold crowns a more precise fit than any other type. While there exists a slight possibility of chipping with porcelain crowns, gold crowns provide no such possibility.

Porcelain and Metal Crowns
For a very natural appearance, porcelain fused to metal crowns are the answer. However, they have a metal substructure and require an opaque below the porcelain. This can make the translucency of natural teeth difficult to replicate. Occasionally a darker line will be visible at the edge of the crown, near to your gum when it recedes with age.

Types of Porcelain
There are basically two types of porcelain you're likely to hear and read about most - the felspathic and pressed ceramic porcelains. The felspathic type is the original method that has been around for 20 years. A Ceramist in a dental lab bakes porcelain onto tin foil and then heats it in an oven. The Ceramist is able to create tints and opaques inside the porcelain to give the natural look we seek.

Pressed ceramic is created from a single ingot. The single ingot is milled in one piece to create the desired shape. The stains and opaques are applied only to the surface of the porcelain to give a natural look.

   

Member login | Contact Us | FAQ | Copyright perfectdentists.com All rights reserved 2004 | Terms and conditions | About us | Sun 14, Sep 2014 17:59pm